|
[China]
Trade Verify
Address: No.1 Yinhe road, Wanshi town, Yixing, Jiangsu,China
Contact name:Delia Wang
Jiangsu milky way steel poles co.,ltd |
|
Verified Suppliers
|
|
|
45M 80 Nos HPS Light High Mast Tower Pole 10mm Thickness 25m with Round Light Carriage
Specifications:
Specification: | 20-50 meters high mast pole |
Type | high mast pole |
Shape | conical, hexagonal and octagonal |
Material | Usually Q345B/A572,minimum yield strength>=345n/mm2 SS400, SS490ST52 |
Torlance of dimenstion | -0.02 |
Design Load in Kg | 300~ 1000 Kg appliced to 50cm from the to pole |
Surface treatment | Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Standard | Octagonal Conical tapered column |
Length of per section | Within 14m once forming without slip joint. |
high mast pole suit for | city square,wharf,stadium |
Option of high mast pole | Height from 20m to 35m |
Production Process of high mast pole | Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify → Flange welding →Hole drilling →Calibration →Deburr→ Galvanization or powder coating ,painting →Recalibration→ Thread →Packages |
Descripition of material:
1. Poles are made by the high-quality metal plants,which were molded into the multi-row cone-
shaped vertical steel barwith hot galvanized anti-corrosion treatment
2. Light plate frame is made by high-quality stainless steel
3. Fastened bolts and nuts of stainless steel
Feature:
Special designed for stadium to provide high-power, large- area lighting for facilities; Lighthouse is devided into fixed or lift, fixed poles set up an escalator inside for i nstallation and maintenance purposes
Light source :400w-1000w sodium light
Installation:
1. high-pressure sodium lamp with external ballast and
Triggers installed in light tray.
2. when replacing or repairing light and other electrical
appliances, you should use special wrench to open it.
3. control box installed at the poles or the lower part of
the poles
Specific explanation:
1.please install according to requirements of the company
2.make sure that the light body touches the ground during
installation.
