Jiangsu milky way steel poles co.,ltd |
Verified Suppliers
|
|
4mm 45FT Galvanized Electric Telescoping Power Pole With Cross Arm
Specification:
Height | From 9 meter to 100 meter |
Suit for | Electric Power Transmission and Distribution |
Shape | Polygonal or Conical |
Material | Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
Power Capacity | 10kV to 220kV |
Tolerance of the dimension | According to client’s requirement. |
Surface treatment | Hot dip galvanized Following ASTM A 123, or any other standard by client required. |
Joint of Poles | Slip joint, flanged connected |
Standard | ISO 9001:2008 |
Length of per section | Within 14 meter once forming |
Welding Standard | AWS (American Welding Society ) D 1.1 |
Thickness | 1 mm to 36mm |
Production Process | Raw material test → Cutting →bending →Welding (longitudinal )→ Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages |
Packages | Packing with plastic paper or according to client’s request. |
Distribution Range | ||||
Product Code | Length | ULS | Pole Dimension | |
Top | Base | |||
11M 13.5KN | 11M | 13.5kN | 160 | 328 |
12.5M 12KN | 12.5M | 12KN | 160 | 340 |
12.5M 16KN | 12.5M | 16KN | 180 | 380 |
12.5M 24KN | 12.5M | 24KN | 200 | 420 |
14M 16KN | 14M | 16KN | 190 | 402 |
14M 24KN | 14M | 24KN | 210 | 465 |
15.5M 12KN | 15.5M | 12KN | 160 | 405 |
15.5M 24KN | 15.5M | 24KN | 210 | 500 |
Note:Tapered 12-sided, direct buried Pole deflection less than 5% of pole height at 50% ULS | ||||
Sub Transmission Range | ||||
Product Code | Length | ULS | Pole Dimension | |
Top | Base | |||
18.5M 24KN | 18.5M | 24KN | 210 | 660 |
18.5M 40KN | 18.5M | 40KN | 260 | 730 |
21M 40KN | 21M | 30KN | 220 | 697 |
21M 40KN | 21M | 40KN | 260 | 795 |
24M 30KN | 24M | 30KN | 220 | 755 |
24M 40KN | 24M | 40KN | 300 | 760 |
Note:Tapered 12-sided, direct buried |
Descripition of material:
1. Poles are made by the high-quality metal
plants,which were molded into the multi-row cone-shaped
vertical steel barwith hot galvanized anti-corrosion
treatment
2. Light plate frame is made by high-quality stainless steel
3. Fastened bolts and nuts of stainless steel
Galvanization
Standard:NFA91121
Average thickness of the galvanization:Not less than 86μm.
Installation
-Remove all the equipment on the pole during Assembly.
-Circle a sling around th epole shaft of each section.
-Fix the sling on top section to one pulley block.
-The sling on the bottom section is tightly fixed and fixed
at the center of gravity.
-Make the steel pole vertical by tighten the sling of the top
section.
-Fix the steel pole.
-Remove the sling.
Standard
Octagonal tapered column
Certified by SIRIM QAS INTERNATIONAL.
Approved by JABATAN KERJA RAYA MALAYSIA.
Conforms to Standard:
Pole design : BS EN 40
Material : BS EN 10025 S275 / JIS G3101 SS400
Welding : BS 5135
Galvanizing : BS 729 / ISO 1461 ASTM A 123
Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is
located in Wuxi,East of China ,near one of the largest sea
port of China ,Shanghai,Port .
Our Company has 24 years experience on producing the steel
poles including the transmission power pole,street light
pole,high mast pole and so on.
We exported to oversea countries since 1991 and our products
have been delivered to more than 70 countries and areas
,including America,Australia ,Russia ,Germany ,Span,Philippines
,Malaysia,Africa and so on.
We are the supplier of many big project in many
countries,like the street light pole of Dubai Tower.the high
mast pole for Sochi Winter Olympic Game and so on.