Home Companies Jiaxing City Qunbang Hardware Co., Ltd

ASME SS 304 316 3inch Stainless Steel Studs And Nuts

Contact Us

[China]

Trade Verify

Address: No.375,Tongle Road,Jiaxing City,Zhejiang Province,China

Contact name:Lance

Jiaxing City Qunbang Hardware Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

ASME SS 304 316 3inch Stainless Steel Studs And Nuts

Country/Region	china
City & Province	jiaxing zhejiang
Categories	Bolts

Product Details

ASME SS 304 316 3inch Stainless Steel Studs And Nuts

Specification

Combine these setup studs with T-slot nuts, flanged nuts, setup clamps, or setup blocks to clamp and hold workpieces, vises, and other objects onto your fixturing table. Also known as double-ended studs, they have threads on both ends. One end threads into a T-slot nut or flanged nut inside the table. The other end passes through a setup clamp and secures with a nut and washer. The middle of the stud is unthreaded for gripping and adjusting the stud.

These setup studs are also used to align parts during assembly. One end of the stud is threaded into the part being added, and the other end fits into the mounting hole of the mating part. Because the studs don't have a head, you have the option to thread them into holes from either end, but they require a nut. You can adjust the distance between the mating parts by tightening and loosening the nut.

18-8 stainless steel studs resist corrosion in humid, damp, and washdown environments, and they're nearly as strong as steel studs.

316 stainless steel studs are the most corrosion-resistant studs we offer. They resist rusting even when exposed to salt water, chlorine solutions, and other chemicals.

Some of these studs meet DIN dimensional and material standards so designers and engineers know that they're compatible with other parts and tools.

Screw Thread
d

d
b	min	When L≤10
		When 10＜L≤16
		When L＞16
U	max	UNC
		UNF
		8UN
d_s	Full body,max
	Full body,min	UNC
		UNF
		8UN
d_s1	Reduced body,max	UNC
		UNF
		8UN
	Reduced body,min	UNC
		UNF
		8UN

0.2500	0.3125	0.3750	0.4375	0.5000	0.5625	0.6250	0.7500	0.8750	1.0000	1.1250	1.2500	1.3750
0.750	0.875	1.000	1.125	1.250	1.375	1.500	1.750	2.000	2.250	2.500	2.750	3.000
1.000	1.125	1.250	1.375	1.500	1.625	1.750	2.000	2.250	2.500	2.750	3.000	3.250
1.500	1.625	1.750	1.875	2.000	2.125	2.250	2.500	2.750	3.000	3.250	3.500	3.750
0.100	0.111	0.125	0.143	0.154	0.167	0.182	0.200	0.222	0.250	0.286	0.286	0.333
0.071	0.083	0.083	0.100	0.100	0.111	0.111	0.125	0.143	0.167	0.167	0.167	0.167
-	-	-	-	-	-	-	-	-	-	0.250	0.250	0.250
0.2500	0.3125	0.3750	0.4375	0.5000	0.5625	0.6250	0.7500	0.8750	1.0000	1.1250	1.2500	1.3750
0.241	0.303	0.364	0.426	0.488	0.550	0.611	0.735	0.859	0.983	1.106	1.231	1.354
0.243	0.304	0.367	0.428	0.491	0.552	0.615	0.739	0.863	0.987	1.112	1.237	1.362
-	-	-	-	-	-	-	-	-	-	1.108	1.233	1.358
0.241	0.303	0.364	0.426	0.488	0.550	0.611	0.735	0.859	0.983	1.106	1.231	1.354
0.243	0.304	0.367	0.428	0.491	0.552	0.615	0.739	0.863	0.987	1.112	1.237	1.362
-	-	-	-	-	-	-	-	-	-	1.108	1.233	1.358
0.213	0.271	0.329	0.385	0.444	0.502	0.559	0.677	0.795	0.910	1.023	1.148	1.256
0.223	0.281	0.343	0.400	0.462	0.521	0.583	0.703	0.822	0.938	1.063	1.188	1.313
-	-	-	-	-	-	-	-	-	-	1.035	1.160	1.284

Screw Thread
d

d
b	min	When L≤10
		When 10＜L≤16
		When L＞16
U	max	UNC
		UNF
		8UN
d_s	Full body,max
	Full body,min	UNC
		UNF
		8UN
d_s1	Reduced body,max	UNC
		UNF
		8UN
	Reduced body,min	UNC
		UNF
		8UN

1.5000	1.6250	1.7500	1.8750	2.0000	2.2500	2.5000	2.7500	3.0000	3.2500	3.5000	3.7500	4.0000
3.250	3.500	3.750	4.000	4.250	4.750	5.250	5.750	-	-	-	-	-
3.500	3.750	4.000	4.250	4.500	5.000	5.500	6.000	6.500	7.000	7.500	8.000	8.500
4.000	4.250	4.500	4.750	5.000	5.500	6.000	6.500	7.000	7.500	8.000	8.500	9.000
0.333	-	0.400	-	0.444	0.444	0.500	0.500	0.500	0.500	0.500	0.500	0.500
0.167	-	-	-	-	-	-	-	-	-	-	-	-
0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250
1.5000	1.6250	1.7500	1.8750	2.0000	2.2500	2.5000	2.7500	3.0000	3.2500	3.5000	3.7500	4.0000
1.479	-	1.727	-	1.975	2.225	2.473	2.723	2.973	3.223	3.473	3.723	3.973
1.487	-	-	-	-	-	-	-	-	-	-	-	-
1.483	1.608	1.733	1.858	1.983	2.233	2.483	2.733	2.982	3.232	3.482	3.732	3.982
1.479	-	1.727	-	1.975	2.225	2.473	2.723	2.973	3.223	3.473	3.723	3.973
1.487	-	-	-	-	-	-	-	-	-	-	-	-
1.483	1.608	1.733	1.858	1.983	2.233	2.483	2.733	2.982	3.232	3.482	3.732	3.982
1.381	-	1.609	-	1.843	2.093	2.324	2.574	2.824	3.073	3.323	3.573	3.823
1.438	-	-	-	-	-	-	-	-	-	-	-	-
1.409	1.534	1.659	1.784	1.909	2.158	2.408	2.658	2.908	3.158	3.407	3.657	3.907

Materials and Chemical compstition

	化学成分CHEMICAL COMPOSI(% )
Type	C碳	Si硅	Mn锰	P磷	S硫	Ni镍	Cr铬	Mo钼	Cu铜	Others
Type	≤	≤	≤	≤	≤	≥	≥	≥	≈
201Cu	0.08	1.00	7.5-10	0.06	0.03	4.00-6.00	14.0-17.0		2.0-3.0
201	0.15	1.00	8.50	0.06	0.03	3.50-5.50	16.0-18.0			N≤0.25
130M/202	0.15	1.00	7.5-10	0.06	0.03	4.00-6.00	17.0-19.0			N≤0.25
202	0.15	1.00	7.5-10	0.06	0.03	4.00-6.00	17.0-19.0
301	0.15	1.00	2.00	0.045	0.03	5.00-8.00	16.0-18.0
302	0.15	1.00	2.00	0.045	0.03	8.00-10.0	17.0-19.0
XM7 (302HQ)	0.08	1.00	2.00	0.045	0.03	8.50-10.5	17.0-9.00		3.0-4.0
303	0.15	1.00	2.00	0.20	≥0.15	8.00-10.0	17.0-19.0	≤0.60
303Cu	0.15	1.00	3.00	0.20	≥0.15	8.0-10.0	17.0-19.0	≤0.60	1.5-3.5
304	0.08	1.00	2.00	0.045	0.03	8.00-10.0	18.0-20.0
304H	0.08	1.00	2.00	0.045	0.03	8.0-10.0	18.0-20.0
304HC	0.08	1.00	2.00	0.045	0.03	8.00-10.0	17.0-19.0		2.0-3.0
304HCM	0.08	1.00	2.00	0.045	0.03	8.0-10.0	17.0-19.0		2.5-4.0
304L	0.03	1.00	2.00	0.045	0.03	9.0-13.0	18.0-20.0
304M	0.06	1.00	2.00	0.045	0.03	8.50-10.0	18.0-20.0
305	0.12	1.00	2.00	0.045	0.03	10.5-13.0	17.0-19.0
305J1	0.08	1.00	2.00	0.045	0.03	11.0-13.5	16.5-19.0
309S	0.08	1.00	2.00	0.045	0.03	12.0-15.0	22.0-14.0
310S	0.08	1.50	2.00	0.045	0.03	19.0-22.0	24.0-26.0
314	0.25	15.-3.0	2.00	0.040	0.03	19.0--22.0	24.0-26.0
316	0.08	1.00	2.00	0.045	0.03	10.0-14.0	16.0-18.0	2.0-3.0
316Cu	0.03	1.00	2.00	0.045	0.03	10.0-14.0	16.0-18.0	2.0-3.0	2.0-3.0
316L (12Ni)	0.03	1.00	2.00	0.045	0.03	12.0-15.0	16.0-18.0	2.0-3.0
316L (10Ni)	0.03	1.00	2.00	0.045	0.03	10.0-14.0	16.0-18.0	2.0-3.0
321	0.08	1.00	2.00	0.045	0.03	9.00-13.0	17.0-19.0			Ti≤5*C%
410	0.15		1.00		0.03		11.5-13.5
416	0.15		1.25		≥0.15		12.0-14.0
420	0.26-0.4		1.00		0.03		12.0-14.0
410L	0.30	1.00	1.00	0.040	0.03		11.5-13.5
430	0.12	0.75	1.00	0.040	0.03		16.0-18.0
430F	0.12	1.00	1.25	0.060	0.15		16.0-18.0
631(J1)	0.09	1.00	1.00	0.040	0.03	6.50-8.50	16.0-18.0			AL 0.75-1.5
2520	0.08	1.00	2.00	0.035	0.03	19.0-22.0	24.0-26.0
410	0.015	1.00	1.00	0.04	0.03		11.5-13.5

PACKING

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

QBH SMALL PACKING

Packing in small boxes according to customer’s requirements

Packing in plastic bag according to customer’s requirements

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

The advantages of QBH

QBH brand sales to the main quality assurance.
Years of export trade management, excellent service, word-of-mouth guarantee.
By working with TUV,escort for quality.
Customization of non-standard parts can be made according to customer's requirements and drawings.
For quality customers,we can provide a certain credit period.