Home Companies Jiaxing City Qunbang Hardware Co., Ltd

SS304 316 Hexagon Slotted High Tensile Stainless Steel Bolts

Contact Us

[China]

Trade Verify

Address: No.375,Tongle Road,Jiaxing City,Zhejiang Province,China

Contact name:Lance

Jiaxing City Qunbang Hardware Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SS304 316 Hexagon Slotted High Tensile Stainless Steel Bolts

Country/Region	china
City & Province	jiaxing zhejiang
Categories	Bolts

Product Details

SS304 316 Hexagon Slotted High Tensile Stainless Steel Bolts

Specification

Install these screws with a wrench or a screwdriver.

18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. 316 stainless steel screws are more corrosion resistant than 18-8 stainless steel screws and have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Match the thread spacing of mating components. Coarse threads are the industry standard; choose these screws if you don’t know the threads per inch. Fine threads are closely spaced to prevent loosening from vibration.

DIN 933 - Hexagon head bolts with thread up to head

Current norm: DIN EN 24017
Equivalent norms: ISO 4017; CSN 021103; PN 82105; UNI 5739; EU 24017

Legend:

l - length of bolt
d - the nominal diameter of the thread
k - head height
r - radius
e - the diameter of the circumscribed circle (not less than)
s - size hex head turnkey
c - thickness of the mounting collar
a - length undercut

Makings:QBH

Steel: 5.6,5.8,8.8,10.9,12.9
Stainless: A2,A4
Plastic: Plastic Pa
Non Ferrous: Brass
Thread: 6g

Table according to DIN 933

Screw Thread
d

M1.6

M2.5

(M3.5)

(M7)

M10

M12

(M14)

M16

P	Pitch
a	max
c	min
c	max
d_a	max
d_w	Grade A	min
d_w	Grade B	min
e	Grade A	min
e	Grade B	min
k	Nominal Size
	Grade A	min
	Grade A	max
	Grade B	min
	Grade B	max
k₁	min
r	min
s	max=nominal size
	Grade A	min
	Grade B	min

0.35	0.4	0.45	0.5	0.6	0.7	0.8	1	1	1.25	1.5	1.75	2	2
1.05	1.2	1.35	1.5	1.8	2.1	2.4	3	3	3.75	4.5	5.25	6	6
0.1	0.1	0.1	0.15	0.15	0.15	0.15	0.15	0.15	0.15	0.15	0.15	0.15	0.2
0.25	0.25	0.25	0.4	0.4	0.4	0.5	0.5	0.5	0.6	0.6	0.6	0.6	0.8
2	2.6	3.1	3.6	4.1	4.7	5.7	6.8	7.8	9.2	11.2	13.7	15.7	17.7
2.4	3.2	4.1	4.6	5.1	5.9	6.9	8.9	9.6	11.6	15.6	17.4	20.5	22.5
-	-	-	-	-	5.7	6.7	8.7	9.4	11.4	15.4	17.2	20.1	22
3.41	4.32	5.45	6.01	6.58	7.66	8.79	11.05	12.12	14.38	18.9	21.1	24.49	26.75
-	-	-	-	-	7.5	8.63	10.89	11.94	14.2	18.72	20.88	23.91	26.17
1.1	1.4	1.7	2	2.4	2.8	3.5	4	4.8	5.3	6.4	7.5	8.8	10
0.98	1.28	1.58	1.88	2.28	2.68	3.35	3.85	4.65	5.15	6.22	7.32	8.62	9.82
1.22	1.52	1.82	2.12	2.52	2.92	3.65	4.15	4.95	5.45	6.56	7.68	8.98	10.18
-	-	-	-	-	2.6	3.26	3.76	4.56	5.06	6.11	7.21	8.51	9.71
-	-	-	-	-	3	3.74	4.24	5.04	5.54	6.69	7.79	9.09	10.29
0.7	0.9	1.1	1.3	1.6	1.9	2.28	2.63	3.19	3.54	4.28	5.05	5.96	6.8
0.1	0.1	0.1	0.1	0.1	0.2	0.2	0.25	0.25	0.4	0.4	0.6	0.6	0.6
3.2	4	5	5.5	6	7	8	10	11	13	17	19	22	24
3.02	3.82	4.82	5.32	5.82	6.78	7.78	9.78	10.73	12.73	16.73	18.67	21.67	23.67
-	-	-	-	-	6.64	7.64	9.64	10.57	12.57	16.57	18.48	21.16	23.16

Screw Thread
d

(M18)

M20

(M22)

M24

(M27)

M30

(M33)

M36

(M39)

M42

(M45)

M48

(M52)

P	Pitch
a	max
c	min
c	max
d_a	max
d_w	Grade A	min
d_w	Grade B	min
e	Grade A	min
e	Grade B	min
k	Nominal Size
	Grade A	min
	Grade A	max
	Grade B	min
	Grade B	max
k₁	min
r	min
s	max=nominal size
	Grade A	min
	Grade B	min

2.5	2.5	2.5	3	3	3.5	3.5	4	4	4.5	4.5	5	5
7.5	7.5	7.5	9	9	10.5	10.5	12	12	13.5	13.5	15	15
0.2	0.2	0.2	0.2	0.2	0.2	0.2	0.2	0.3	0.3	0.3	0.3	0.3
0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	1	1	1	1	1
20.2	22.4	24.4	26.4	30.4	33.4	36.4	39.4	42.4	45.6	48.6	52.6	56.6
25.3	28.2	30	33.6	-	-	-	-	-	-	-	-	-
24.8	27.7	29.5	33.2	38	42.7	46.5	51.1	55.9	59.9	64.7	69.4	74.2
30.14	33.53	35.72	39.98	-	-	-	-	-	-	-	-	-
29.56	32.95	35.03	39.55	45.2	50.85	55.37	60.79	66.44	71.3	76.95	82.6	88.25
11.5	12.5	14	15	17	18.7	21	22.5	25	26	28	30	33
11.28	12.28	13.78	14.78	-	-	-	-	-	-	-	-	-
11.72	12.72	14.22	15.22	-	-	-	-	-	-	-	-	-
11.15	12.15	13.65	14.65	16.65	18.28	20.58	22.08	24.58	25.58	27.58	29.58	32.5
11.85	12.85	14.35	15.35	17.35	19.12	21.42	22.92	25.42	26.42	28.42	30.42	33.5
7.8	8.5	9.6	10.3	11.7	12.8	14.4	15.5	17.2	17.9	19.3	20.9	22.8
0.6	0.8	0.8	0.8	1	1	1	1	1	1.2	1.2	1.6	1.6
27	30	32	36	41	46	50	55	60	65	70	75	80
26.67	29.67	31.61	35.38	-	-	-	-	-	-	-	-	-
26.15	29.16	31	35	40	45	49	53.8	58.8	63.1	68.1	73.1	78.1

Process flow

Cold forging

Annealing treatment(if need) ➨ wiredrawing ➨ clod forging ➨ thread rolling ➨make heat treatment(if need) ➨ Finish ➨ Packing

Hot forging

Cutting material ➨ hot forging ➨ turning ➨ shrink diameter(half thread) ➨thread rolling ➨ make heat treatment(if need) ➨ Finish ➨ Packing

Materials and Chemical compstition

	化学成分CHEMICAL COMPOSI(% )
Type	C碳	Si硅	Mn锰	P磷	S硫	Ni镍	Cr铬	Mo钼	Cu铜	Others
Type	≤	≤	≤	≤	≤	≥	≥	≥	≈
201Cu	0.08	1.00	7.5-10	0.06	0.03	4.00-6.00	14.0-17.0		2.0-3.0
201	0.15	1.00	8.50	0.06	0.03	3.50-5.50	16.0-18.0			N≤0.25
130M/202	0.15	1.00	7.5-10	0.06	0.03	4.00-6.00	17.0-19.0			N≤0.25
202	0.15	1.00	7.5-10	0.06	0.03	4.00-6.00	17.0-19.0
301	0.15	1.00	2.00	0.045	0.03	5.00-8.00	16.0-18.0
302	0.15	1.00	2.00	0.045	0.03	8.00-10.0	17.0-19.0
XM7 (302HQ)	0.08	1.00	2.00	0.045	0.03	8.50-10.5	17.0-9.00		3.0-4.0
303	0.15	1.00	2.00	0.20	≥0.15	8.00-10.0	17.0-19.0	≤0.60
303Cu	0.15	1.00	3.00	0.20	≥0.15	8.0-10.0	17.0-19.0	≤0.60	1.5-3.5
304	0.08	1.00	2.00	0.045	0.03	8.00-10.0	18.0-20.0
304H	0.08	1.00	2.00	0.045	0.03	8.0-10.0	18.0-20.0
304HC	0.08	1.00	2.00	0.045	0.03	8.00-10.0	17.0-19.0		2.0-3.0
304HCM	0.08	1.00	2.00	0.045	0.03	8.0-10.0	17.0-19.0		2.5-4.0
304L	0.03	1.00	2.00	0.045	0.03	9.0-13.0	18.0-20.0
304M	0.06	1.00	2.00	0.045	0.03	8.50-10.0	18.0-20.0
305	0.12	1.00	2.00	0.045	0.03	10.5-13.0	17.0-19.0
305J1	0.08	1.00	2.00	0.045	0.03	11.0-13.5	16.5-19.0
309S	0.08	1.00	2.00	0.045	0.03	12.0-15.0	22.0-14.0
310S	0.08	1.50	2.00	0.045	0.03	19.0-22.0	24.0-26.0
314	0.25	15.-3.0	2.00	0.040	0.03	19.0--22.0	24.0-26.0
316	0.08	1.00	2.00	0.045	0.03	10.0-14.0	16.0-18.0	2.0-3.0
316Cu	0.03	1.00	2.00	0.045	0.03	10.0-14.0	16.0-18.0	2.0-3.0	2.0-3.0
316L (12Ni)	0.03	1.00	2.00	0.045	0.03	12.0-15.0	16.0-18.0	2.0-3.0
316L (10Ni)	0.03	1.00	2.00	0.045	0.03	10.0-14.0	16.0-18.0	2.0-3.0
321	0.08	1.00	2.00	0.045	0.03	9.00-13.0	17.0-19.0			Ti≤5*C%
410	0.15		1.00		0.03		11.5-13.5
416	0.15		1.25		≥0.15		12.0-14.0
420	0.26-0.4		1.00		0.03		12.0-14.0
410L	0.30	1.00	1.00	0.040	0.03		11.5-13.5
430	0.12	0.75	1.00	0.040	0.03		16.0-18.0
430F	0.12	1.00	1.25	0.060	0.15		16.0-18.0
631(J1)	0.09	1.00	1.00	0.040	0.03	6.50-8.50	16.0-18.0			AL 0.75-1.5
2520	0.08	1.00	2.00	0.035	0.03	19.0-22.0	24.0-26.0
410	0.015	1.00	1.00	0.04	0.03		11.5-13.5

PACKING

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

QBH SMALL PACKING

Packing in small boxes according to customer’s requirements

Packing in plastic bag according to customer’s requirements

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

The advantages of QBH

QBH brand sales to the main quality assurance.
Years of export trade management, excellent service, word-of-mouth guarantee.
By working with TUV,escort for quality.
Customization of non-standard parts can be made according to customer's requirements and drawings.
For quality customers,we can provide a certain credit period.

Product application

The DIN 933 are a hexagon shaped screws, manufactured from steel. Grade 10.9 metric bolts are produced using DIN 933 bolt material such as, either medium carbon steel, medium carbon steel alloy or low carbon boron steel. In order to qualify as a grade DIN 933 bolt 10.9 metric bolts, the allot has to be processed by both quenching as well as tempering. Usually, the DIN 933 bolt 10.9 is used in applications for bolting large and forged parts, and the automotive industry as well.