Active Member
|
[China]
Address: Room2434,3rd floor,Building 469 Fengjin Road,Fengxian District,Shanghai
Contact name:David
BoYue Industrial (Shanghai)Co., Ltd. |
|
|
ASME SB676 UNS N08367 Alloy AL-6XN Stainless Hastelloy Pipe Welded
Tube OD1/2"-48”
SPECIFICATION FOR UNS N08366 AND UNS N08367 WELDED TUBE
UNS N08366 AND UNS N08367
| 1.Scope 1.1 This specification covers UNS N08028 seamless cold-finisfd tubes intended for general corrosive service. 1.2 This specification covers outside diameter and average wall tube, or otside diameter and minimum wall tbe. 1.2.1 This specification covers tubes 5/8 to 5 in. (15.9 o 127 mm), inclusive, in outside diameter and 0.065 to 0.500 in. 9 1.65 to 12.70 mm), inclusive, in wall thickness. NOTE 1 ? Tubing having other dimensions may be furnished spon agreeent between he manufacturer and the purchader, provided such tubes comply with all other requirements of this specification. 1.3 The values stated in inch-pound units are to be regarded as the standard. |
TABLE1 CHEMICAL REQUIREMENTS
| Element | composition Limits, % | Product(Check) Analysis Variations, under min or over max of the Specified Limit of Element, % | |
| N08366 | N08367 | ||
| Carbon | 0.035max | 0.030max | 0.005 |
| Manganese | 2.00max | 2.00max | 0.04 |
| Silicon | 1.00max | 1.00max | 0.05 |
| Phosphorus | 0.040max | 0.040max | 0.005 |
| Sulfur | 0.030max | 0.030max | 0.005 |
| Chromium | 20.00 to 22.00 | 20.00 to 22.00 | 0.25 |
| Nickel | 23.50 to 25.50 | 23.50 to 25.50 | 0.20 |
| Molybdenum | 6.00 to 7.00 | 6.00 to 7.00 | 0.15 |
| Nitrogen | ... | 0.18 to 0.25 | 0.01 |
| IronA | Remainder | Remainder | |
| Copper | ... | 0.75max | 0.04 |
AIron shall be determined arithmetically by difference.
TABLE2 MECHANICAL PROPERTIES
| Type | condition(Temper) | Tensile Strength, min, ksi(MPa) | Yield Strnegth, 0.2% Offset, min, ksi(MPa) | Elongation in 2 in . or 50mm(or 4D),min, % |
| N08366 | Solution treated(Class 1 and Calss2) | 75(517) | 30(206) | 30 |
| N08367 | Solution treated(Class 1 and Calss2) | 100(690) | 45(310) | 30 |
AL-6XN
Common Trade Names: AL-6XN Super Austenitic Stainless Steel.
A high molybdenum superaustenitic with outstanding resistance to
chloride pitting, crevice corrosion and stress corrosion cracking.
Suitable for use in pulp mill bleach plants, seawater heat
exchangers and chemical process equipment
Available Product Forms:
Pipe, tube, fitting, flange, sheet, strip, plate, round bar, flat
bar, fastener, forging stock, hexagon and wire.
Specifications
AL-6XN is designated as UNS N08367.
ASME SB-688, ASME SA-240, ASME SB-675, ASME SA-312, ASME SB-676,
ASME SA-249, ASME SB-691, ASME SA-479, ASME SB-462, ASME SA-182,
ASME SB-564, ASME SB-366
ASTM B688, ASTM A240, ASTM B675, ASTM A312, ASTM B676, ASTM A249,
ASTM B804, ASTM B691, ASTM A479, ASTM B462, ASTM A182, ASTM B564,
ASTM B366, ASTM B472
NACE MR-0175
Trademark Notice: Some names are trade names and/or trademarks of
specific manufacturers. American Special Metals, Corp. is not
affiliated with any manufacturer(s). Orders will be filled to meet
specifications from any available source(s). Names are listed
solely for reference to help identify products consistent with
listed specifications.
American Special Metals, Corp. makes all reasonable efforts to
ensure the accuracy and correctness of the data in this document
but makes no representations or warranties as to the data’s
accuracy, correctness or reliability. All data are for general
information only and not for providing design advice. It is the
responsibility of the user to test specific alloys under actual
service conditions to determine their suitability for a particular
purpose.
Chemical Composition
| Cr | Ni | Mo | C | N | Mn | Si | P | S | Cu | Fe | |
| MIN | 20.00 | 23.50 | 6.00 | -- | 0.18 | -- | -- | -- | -- | -- | |
| MAX | 22.00 | 25.50 | 7.00 | 0.03 | 0.25 | 2.00 | 1.00 | 0.04 | 0.03 | 0.75 | Balance |
Product Attribute
| Place of Origin | China | Brand Name | BOYUE |
| Standard | ANSI, ISO, ASME, DIN, ASTM | Type | Seamless |
| ModelNumber | Alloy Steel Pipe | Thickness | SCH 5-SCH XXS |
| Packing | Depending on customer | Payment | 30%TT+70% Balance |
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's
requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Minimum Order Quantity: | 1pcs |
| Price: | Depending on quantity |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 40000 ton per month |
| Delivery Time: | 10-100 days depending on quantity |
| Packaging Details: | Depending on customer |
Why Choose Us
1.One-Stop Service,One Single Source.
2.No MOQ.
3.Best quality,competitive price
4.Fast Reply.
5.On-Time Delivery
6.Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing
of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce
based on your drawings.
Q3: Will my drawing be safe after you get it?
A3: Yes, we will not release your design to third party unless with
your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to
ensure quality standard, but it’s charged according to your
drawing.
