Electromagnetic Double Beam Overhead Crane Working Class A6 Type QC 5~16T

Electric System:
1. Control panel protection degree is IP54;
2. Reasonable components installation, convenient for check and maintenance;

Safety Protection Devices:
Overload limiter, limit switch, interlocking protection devices, buffer, track sweep plate, bus bar protection board, anti-collision device, main disconnecting switch, emergency stop system and motor overload protection.

QC Type 5~16t Electromagnetic Bridge Crane 5t,10t,16t working class A6 with two trolleys thaat works simultaneously or separately,this crane is suitable to lift long materials(wood,paper tube,pipe and bar)in workshops or outdoor stores in factories and mines.

Lifting capacity: 5t~16t

Span: 10.5~31.5m

Constitution:

The bridge: traverses on the runway;

The trolley: traverses on the bridge and lifts up and down;

The runway: tied to the building structure.

NOTE:Power supply for the main vehicle can be either through angle steel or safety slide wire.Operation can be done in the cabin(open-type and close-type),on the ground or through remote control.

Attention:

Safety is the most important issue for cranes. To ensure the safety,It is prohibited to use the equipment in the combustible, explosive or corrosives environment.(Need explosion proof type for this).Safety system:

1. All the cranes are equipped with overload protection device, Top quality long time bearing polyurethane materials buffer, Crane traveling limit switch, Voltage lower protection function, Emergency stop system and so on.

2. All operations are controlled by central control system. Excellent After Sales Service

3. The whole machines would be guaranteed for one year from the test run date.

4. Low charge for continue maintenance when warranty is expired.

FAQ