Modular Connecting Corridor Skywalk Prefab Steel Structures
Fabrication for Urban High Rise Buildings
Prefab Steel Structures Materials advantage
1) Steel galvanized layer thickness: general area of the structure
of the galvanized layer thickness of two sides is 180g/m2 (American
Standard G60, single-side galvanized layer thickness of 13μM),
strong corrosion area of not less than 270g/m2 (American Standard
G90, single-side galvanized layer thickness of 20μM )
2) Durability: steel structure residential housing can prolong
life, structure life up to 100 years
3) Earthquake resistance: application to the seismic intensity of 9
degrees above the region
4) Designing usage steel weight: 25-35kg/m2 (construction area)
5) Floor load: 250kg/square
Specification
Material: | specification: |
Length | As customer's requirement |
Width | As customer's requirement |
Height | As customer's requirement |
Column | H shaped,Q345 |
Beam | H shaped,Q345 |
Purline | C/Z shaped,Q235/Q345 |
Brace | Round bar,Q235 |
Knee brace | Steel angle,Q235 |
Tie bar | Steel round tube,Q235 |
Roof panel | single steel sheet /sandwich panel/UPVC Panel |
Wall panel | single steel sheet /sandwich panel/UPVC Panel |
Gutter | 0.8mm steel sheet/1.2mm steel sheet/3mm steel sheet |
Rain Pipe | DN110mm PVC rain pipe |
Foundation system
Prefabricated villa keel structure with strip foundation, because
the building lightweight, force bearing layer requirements is not
high, endurance of every square meter 8-13 tons can meet the
requirements, the foundation is usually 600 to 800 feet wide, base
width is 180-200mm, depth as the geological conditions and the
winter of frozen soil layer depends on the thickness, depth to dig
to no disturbance of soil, if backfill, follow the endurance
requirements for backfilling, based on the depth should be over
winter frozen layer thickness.
Floor system
Floor system of prefabricated villa is composed of cold-formed
steel frame, beam, floor OSB structure board, supports, and
connecting parts, materials used are oriented strand board, fiber
cement board, and plywood, light floors can load 316-365 kg per
square meter.
Wall system
Wall body of light steel structure is mainly composed of wall frame
top beam, wall, wall bottom beam, wall support, wall panels and
connecting components, prefabricated villa use inner transverse
wall as bearing wall, wall column is C shaped light steel, wall
thickness depend on the load, usually 0.84-2 mm, it is 400-600 mm
between wall column spacing, light steel structure housing the wall
structure arrangement, can effectively bear and transfer vertical
loads and the arrangement is convenient, but the light steel
structure house wall structure cannot bear horizontal loads.
Flat roof system
Prefabricated villa keel structure of flat roof has two forms, one
is no parapet wall but with bar and another is with parapet wall.
We are hornoed, from material purchase and tracing, shop drawing
detailing, production arrangement, quality inspection, to on-going
painting, packing and delivering, to have separated department to
strictly control process, quality and traceability, so that the
perfect structural steel bridge can be made.
Meanwhile various standards ranging from Europe EU Standard,
America ASTM Standard, British BS Standard, Australia AS/NZS
Standard structural steelworks fabrication are also available.
Warmly welcome all friends and clients from International market to
visit us and have face talking together!