|
[China]
Trade Verify
Address: B631, HUAFANG INTERNATIONAL MANSION, No.178 CHENGBEI STR., ZHANGJIAGANG, JIANGSU, PRC, 215600
Contact name:Juliet
ZHANGJIAGANG MEDPHARM MACHINERY LTD. |
|
Verified Suppliers
|
|
|
Rectangular Chamber With Smooth Round Corners And Jacket Medical Instrument
Sterilizer Machine
| Model | MDL-0.24 | MDL-0.36 | MDL-0.6 |
| Chamber Size(W*H*D mm) | 600*600*670 | 600*600*1000 | 610*910*1170 |
| Overall Size(W*H*D mm) | 1350*1800*1010 | 1350*1800*1340 | 1450*1900*1510 |
| Steam(Kg/cycle) | 20 | 25 | 30 |
| Water(Kg/cycle) | 30 | 40 | 60 |
| Power(KVA) | 2 | 2 | 3 |
| Applications | Sterilization of Liquids | ||
| Unwrapped instruments and glassware | |||
| Wrapped instruments, packs and utensils | |||
Sterilizers shall be horizontal with vertically opening double
door, horizontal chamber
type (rectangular chamber with smooth round corners and jacket)
with fully automated operating
system. The entire construction including all components shall be
fully compliant with cGMP
requirements
Sterilization Chamber
The chamber shall be rectangular, with smooth and rounded corners.
The chamber shall be designed as per GB150 pressure vessel code.
The chamber shall be made of AISI 316L or 304 with surface roughness less than 0.5µm.
The chamber shall be re-inforced with an AISI 304 jacket.
The sterilizer support frame for the entire structure shall be made of
AISI 304.
The sterilizer shall be able to reach and maintain sterilization
temperature of 121°±1.0°C
Chamber Doors
All Steam sterilizers shall have double door.
The door made of AISI 316L with internal surface roughness less
than 0.5µm.
Sliding door models. Door opening and closing shall be automatic.
The door gaskets made of high temperature resistant silicone
rubber with rounded corners.
Door Safety
The following door safety features provided for operator
safety:
Door interlocking to prevent simultaneous opening of both the
doors.
Door process lock to prevent opening of doors when the process is
on.
Sterile side door to open only after sterilization cycle.
Insulation
The sterilization chamber shall be insulated with thick mineral
wool, hold in place by an outer
cover of AISI 304. Chamber insulation shall be in such a way that
the external surface
temperature shall not exceed 50ºC during operation.
Piping
All piping made of AISI 316 with internal surface roughness less
than 0.5µm.
All welds on piping made with orbital TIG method.
All non contact surfaces shall be of AISI 304.
All pipes installed to ensure the possibility to drain them
completely and avoid condensate residuals..
Steam traps of sanitary design shall be provided in the steam lines
for condensate removal.
All the pipe fittings shall be of sanitary Tri-clover type.
Medpharm medical large steam autoclave brochure.pdf
