Home Companies Shanghai Wind Automation Equipment Co.,Ltd

Growler How To Test Armature Resistance Surge Dielectric Hi Pot With Starting Motor Judge

Shanghai Wind Automation Equipment Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: No.4 Building , No.388, Kongjiang Road,Yangpu District,200093,Shanghai,China

Contact name:Emily

Inquir Now

Shanghai Wind Automation Equipment Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Growler How To Test Armature Resistance Surge Dielectric Hi Pot With Starting Motor Judge

Country/Region china
City & Province shanghai shanghai
Categories Rubber Product Making Machinery Parts
InquireNow

Product Details

This armature testing machine is a fully automatic machine for armature performance testing. All the test quality report can be generated and printed.Machine has various testing options available to do testing. 
 

This starter armature tester WIND-ATS-02 had worked for many local big famous starter manufactures including Huachuan,Shendian.

One of them purchased 5pcs at the first time and then 7pcs, we can say 80% of the local starter manufacturers are using our testing device,

Our engineering team bulid this tester according to customers requirement and had much experience,

upgrade the tester gradually in past years, combine and considering starter manufacturers' feedback and new requirements,

In short word, the test items are based on starter armature manufaturers' requirements, you can depend on it for judging your armature quality,

The Armature tester WIND-ATS-02 can test armature below 36slots, so it is OK with slots from 12 up to 33 slots.


Yes, all the result is showed on screen slot by slot,

we took a video focus on the screen with a 23slots armature, please refer to attached video,

 

You can see on the screen 6 test items being tested one by one with 23 data come out gradually,



(1)Machine specifications
Power Supply VoltageAC 220V, 50Hz
Air source Pressure0.4~0.6MPa
Test cycle8~9s (according to 33bars)
Temperature0~45ºC
Dimension950x1250x580mm

(2)Testing specifications
Test ItemsTest DescriptionTest result
Bar to Bar resistance0.01mΩ~10mΩ≤±0.5% Full scale
Welding resistance0.01mΩ-10mΩ±10μΩ
180ºC cross resistance0.01mΩ-10mΩ≤±1.5% Full scale
Surge100-1000Vpp (Max 36sets waveform)±5%
Isolation resistanceDC 500V0.1-500MΩ
≤±5% Full scale
HipotAC 100-1000V0-20mA
≤±.5% Full scale

(3) Application
Suitable for auto starter armatures to do performance testing.


(4) Features
1. Bar to Bar resistance,0.01mΩ~10mΩ (Out of range display OVER)
Four-terminal measurement to ensure accuracy
2. Welding resistance,0.001mΩ-10mΩ (Out of range display OVER)
Six-terminal measurement to ensure accuracy
3. Cross resistance 0.01mΩ-10mΩ
Four-terminal measurement to ensure accuracy
4.Surge 100-1000V (100V/time)
Pulse crest:0.5u sec, Frequency 1~40MHz
Standard waveform is Write, OK waveform is Green, NG waveform is Red
5.Isolation resistance DC 500V
Testing time:1~10s (0.1s/time)
Range:1~500MΩ
Accuracy: ≤±5%
6.Hipot AC 100-1000V

Testing time:1~10s (0.1s/time)

(5)Machine configuration
15'' Touch screen
Sampling Chip: BB/TI (USA import)
Relay:NAIS(Japan Panasonic)
High voltage relay:Toward
Pneumatic parts: Airtac

 

Hot Products

How To Produce BLDC Motor With Winding Machine Wire Broken Alarm WIND-3A-TSM Application: Needle ...
BLDC Motor Stator Needle Winding Machine 60RPM Parallel Wires To 600RPM Thin Wire (1)Specification ...
BLDC, PMSM and EV Motors Stator Needle Winding Machine For Straight Lamination Stator This type of ...
12 Slots BLDC Motor Stator 1.13mm AWG17 Copper Wire Needle Winding Machine WIND-2-TDM (1) Applicatio...
Suitable Winding Machine For New Start Product Small BLDC 50W-500W Motor WIND-BLDC-2 (1) Application ...
Electric Vehicle Winding Machine For Electric Tricycle Brushless For 36Slots 48 Slots 54Slots Hub ...