Copper Wire Armature Winding Machine PMDC Rotor Riser Commutator

PMDC Rotor Riser Commutator Armature AWG16 To AWG30 Copper Wire Winding Machine
WIND-ST-TD2B
 
 
 
Application:
 
Slotted winding
 
 
 
Advantages:
 
1. For armature with thin copper wire, 
 
  Machine had good feedback of winding AWG30(0.25mm) copper wire diameter armature
 
2. For armature with thick wire, machine WIND-ST-TD2B can handle AWG16 (1.35mm) armature
 
3. No need to work with special designated commutator slotting machine
 
4. 98% yield rate above assured when the slot commutator quality is good
 
5. Till now it is the best machine in China for winding slot type armature
 
 
 
Parameter:
 
Power supply: 220V, 50HZ
 
Motor: Winding Mitsubshi 1000W servo motor
 
Arraying Mitsubshi 400W servo motor
 
Indexing Mitsubshi 400W servo motor
 
Wire diameter:0.45mm~1.25mm
 
Unit OD:70~250mm
 
Spindle: 0~1500rpm
 
Turns No.0-999
 
Air pressure: 0.5-0.7Mpa
 
Pneumatic: Airtac
 
 
 
Instruction for Use:
 
Manually put on armature and press 'Start' botton, machine will do clamping, hooking ,windinging, indexing
 
automatically and repeatly until one armature was fully wound.
 
WIND-ST-TD2B winding machine is to do winding for the armature with riser type commutator. 
 
It has double flyer to make the winding and with auto wire cutting, clamping structure, assisting wire
 
inserting way to upgrade the winding speed.
 
 

 
 
Please click below picture to view video