|
[China]
Trade Verify
Address: No.4 Building , No.388, Kongjiang Road,Yangpu District,200093,Shanghai,China
Contact name:Emily
Shanghai Wind Automation Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
Two Flyer Fully Automatic Winder Lap Winding Machine For Wiper Mixer Motor WIND-STR
Application:
This armature winder WIND-STR is a fast flyer coil winding machine for motor mass production
manufacturing of hook type commutator armature,Mixer,Vacuum cleaners, Hammers,Power tool...
Working Principle:
This fully automatic winding machine WIND-STR adapts double flyers structure, 2pcs Mitsubishi servo
motor drive the two flyers rotation, and 1pc Mitubishi indexing servo motor make sure the precise
indexing.
During working, the armature stack is clamped tightly by left and right side two winding tooling and shaft
clamping device. When flyers are running, wire goes through the wire holder, tension device then enters
hollow spindle, comes out from wire sliding wheel, then the wire slides into the armature slot through flyer
wire guiding wheel. After this step, armature into the slot to do winding.
Armature double flyer winding machine WIND-STR takes conductors from two separate reels of wire
simultaneously to wind two slots together. Once would with the correct number of turns and connected to
the respective commutator hook, the armature is indexed automatically to the next pair of slots to be
wound.
Advantages:
1. Crazy Fast , in normal condition can wind at speed 1000~1500rpm, get one piece wound armature in
23s
2. The winding parameter can be setted on touch screen for different armatures, easy operation
as 12 slots, 24 hook
12slots, 12slots
Quick details:
Armature winding manufacturing requirement |
Armature lamination drawing, winding diagram
|
Armature winder application |
Car motor, automotive motor,Wiper motor, mixer motor
|
Armature commutator type |
Hook type armature, not slotted type
|
Parameter Data:
Wire diameter range: 0.16~1.2 mm
Armature diameter: 20~85 mm
Stack length: 10~70 mm
Shaft diameter: 3~15 mm
Shaft length: less than 250mm
Armature Slot: even slot
Turn number: 0~9999
Commutator diameter: 8~40 mm
Winding speed: 0~2500 rpm
Winding motor power: 1.5KWX2
Angle detecting speed: 0~3000 rpm
Angle detecting motor power: 0.75KWX1
Air supply pressure: 4~6 Kg/cm2
The machine total power: 4.0 KW
Voltage: three phase AC 380V 50/60 Hz
Weight: 1250 Kg
Dimension: 2000(length)X1000(width)X1800(height)mm
Package size 1800*1510*1920mm is about 5.2 CBM
HS code: 8479811000
Main Parts:
Japan Mitsubishi PLC
Japan Mitsubishi or Panasonic servo motor control system
5.7’’ colorful touch screen system
SMC Cylinder
Please click below picture to view video
