SUS301L Stainless Stell Sheets & Strip TISCO 301L Stainless
Steel 0.4 - 2.5mm with 4ft width
Products Name | 301 stainless steel sheets |
Thickness | 0.3 - 3.0mm |
Width | 5 - 1219mm |
Length | 2438mm or customs as request |
Surface | 2B (PVC film) |
Hardness | 1/4H 1/2H 3/4H FH Soft |
Service | Slit Cutting |
Brand | BAOSTEEL POSCO BAOXIN JISCO TISCO |
Other Grade | 201 301 304 304L 309S 310S 316L 321 310S 410 420 430.etc |
MOQ | 1 Ton |
Standard Size | 1219*2438mm |
Type 301 stainless steel is a commonly used Austenitic stainless
with higher strain-hardening. It offers good corrosion resistance,
high strength, and elevated carbon to allow for cold working to a
variety of tempers. It can be obtained in the 1/4 hard, 1/2 hard,
fully hard and extra hard tempers. It retains sufficient ductility
under 1/2 hardening conditions to be formed by rolling or bending
into aircraft parts, structural parts of buildings, and especially
railway carriage parts. Cold rolled slabs hardened by 3/4 to full
hardening should be used for parts requiring high wear resistance
and elasticity. Type 301L is the low carbon version of the 301
stainless steel, The typical application of 301 and 301L including
gaskets, springs, shims, fasteners, tools, blades, automotive
parts, aerospace components, kitchen utensils and Tableware,
electrical components and others.
Grade 301 is a cheaper alternative to the traditional high-nickel
austenitic stainless steels such as grade 304. Grade 301L stainless
steel is a low carbon steel which is ideal for improved ductility
and when heavy sections are to be welded. Unlike welds in grade
301, grade 301L does not need to be annealed for maximum corrosion
resistance.
The following datasheet provides an overview of grade 301L
stainless steel.
Chemical Composition
The chemical composition of grade 301L stainless steel is outlined
in the following table.
Grade | C | Cr | Ni | Si | Mn | P | S | N |
301 | 0.15 | 16.0-18.0 | 6.00-8.00 | 1.00 | 2.0 | 0.045 | 0.030 | 0.10 |
301L | 0.03 | 16.0-18.0 | 6.00-8.00 | 1.00 | 2.0 | 0.045 | 0.030 | 0.10 |
Mechanical Properties
The mechanical properties of grade 301L stainless steel are
displayed in the following table.
Grade/r | Tensile Strength, Mpa (min.) | Yield Strength 0.2% Mpa (min.) | Elongation -% in 50 mm (min.) |
301 Annealed | 515 | 205 | 40 |
301 1/4 Tempe | 860 | 515 | 25 |
301 1/2 Tempe | 1035 | 760 | 18 |
301 Full Hard | 1275 | 965 | 9 |
Other Designations
Equivalent materials to grade 301L stainless steel are JIS SUS301L
and ASME SA240.
Applications
Grade 301L stainless steel is widely used pressure vessels and for
general applications.