Home Companies JIANGSU MITTEL STEEL INDUSTRIAL LIMITED

Astm A182 Grade F61 Stainless Steel Seamless Pipe 2507 Cu 329j2l 1.4507 Cold Drawn

Contact Us

[China]

Trade Verify

Address: NO.288,YOUYI ROAD ,XI SHAN DISTRICT,WUXI CITY,CHINA

Contact name:Gao Ben

JIANGSU MITTEL STEEL INDUSTRIAL LIMITED

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Astm A182 Grade F61 Stainless Steel Seamless Pipe 2507 Cu 329j2l 1.4507 Cold Drawn

Country/Region	china
City & Province	wuxi jiangsu
Categories	Metal Casting Machinery

Product Details

MITTEL STEEL supply to you high quality W-Nr 1.4462 duplex steel pipe, W-Nr 1.4417 duplex steel pipe,W-Nr 1.4507 duplex steel pipe,W-Nr 1.4501 duplex steel pipe,W-Nr 1.4362 duplex steel pipe,W-Nr 1.4410 duplex steel pipe, W- duplex steel pipe, we are aslo W-Nr 1.4462 duplex steel pipe manufacturer , W-Nr 1.4417 duplex steel pipe exporter,W-Nr 1.4507 duplex steel pipe producer,W-Nr 1.4501 duplex steel pipe stockholder,W-Nr 1.4362 duplex steel pipe supplier,W-Nr 1.4410, W- duplex steel pipe

duplex steel pipes general description:

1. Surface Pickling, annealing, polishing, bright, sand blast, hair line, etc.

2. Price Term Ex-work, FOB, CFR, CIF, or as required.

3. Payment Term T/T, L/C, Western Union.

4. MOQ 500kg

5. Delivery Time Prompt delivery or according to order's quantity.

6. Package

Export standard package: bundled wooden box, suit for all kinds of transport,or be required.

duplex steel pipe details description:

1.	Item	s steel pipe
2.	Material	W-Nr 1.4417,W-Nr 1.4507,W-Nr 1.4501,W-Nr 1.4362,W-Nr 1.4410, W-Nr 1.4460,SAF 2205,SAF 2507,SAF 2304,etc.
3.	Specifications	Wall thickness	1.0-150mm(SCH10S-XXS)
		Outside diameter	3.0-2500mm(1/8"-100")
		Length	6m,5.8m,8m,11.8m,12m or as required.

duplex steel pipe chemical composition:

Steel Grade	C≤	Mn≤	Si≤	S≤	P≤	Cr	Ni	Mo	Cu≤	N
S32750((SAF2507) 00Cr22Ni7Mo4N	0.03	1.20	0.80	0.020	0.035	24.0/ 26.0	6.0/ 8.0	3.0/ 5.0	0.50	0.24/ 0.32
S31803(SAF2205) 00Cr22Ni5Mo3N	0.03	2.00	1.0	0.02	0.030	21.0/ 23.0	4.50/ 6.50	2.50/ 3.50		0.08/ 0.20
S31500(3RE60) 00Cr18Ni5Mo3Si2	0.03	1.2/ 2.00	1. 4/ 2.00	0.030	0.030	18.0/ 19.0	4.25/ 5.25	2.50/ 2.00		0.05/ 0.10

Steel Grade	Heat Treatment℃	Ab(MPa)≥	As(MPa)≥	EL≥	HB	HRC
S32750(SAF2507) 00Cr22Ni5Mo3N	1025-1125	800	550	15	310	32
S31803(SAF2205) 00Cr22Ni5Mo3N	1020-1100	620	450	25	290	30.5
S31500(3RE60) 00Cr18Ni5Mo3Si2	980-1040	630	440	30	290	30.5

Product Analysis
1 An analysis of either one billet or one length of flat-rolled stock or one tube shall be made from each heat. The chemical composition thus determined shall conform to the
requirements specified.
2 A product analysis tolerance (see the annex table on Chemical Requirements (Product Analysis Tolerances) in SpecificationA 480/A 480M) shall apply. The product analysis
tolerance is not applicable to the carbon content for material with a specified maximum carbon of 0.04 % or less.
3 If the original test for product analysis fails, retests of two additional billets, lengths of flat-rolled stock, or tubes shall be made. Both retests for the elements in question shall meet the requirements of this specification; otherwise, all remaining
material in the heat shall be rejected or, at the option of the producer, each billet or tube may be individually tested for acceptance. Billets, lengths of flat-rolled stock, or tubes that do not meet the requirements of this specification shall be rejected.

product show: