|
[China]
Trade Verify
Address: NO.288,YOUYI ROAD ,XI SHAN DISTRICT,WUXI CITY,CHINA
Contact name:Gao Ben
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
|
Verified Suppliers
|
|
|
Stainless Round Bar AISI 329 Size 4,5" Length 329 Stainless Steel Round Bar | AISI 329 Bar
| Standards | Designation |
|---|---|
| ASTM | A 276 |
| Length | Diameter |
|---|---|
| 3 – 500mm | 2-12m |
| Type | Certification |
|---|---|
| 329 Stainless Steel Round Bar | ISO 9001:2008 |
Below you will find a brief overview of a number of stainless steel
bar specifications. If you do not see a specification listed,
please contact us.
| BS | JIS | IS | DIN | ASTM | |
|---|---|---|---|---|---|
| Semi Free Cutting Steel | 15AM/8M | SMn433H,SUM 41 | 13S25/ 40C10S 18/40Mn15S12 | — | 1137,1140 |
| Free Cutting Steel | EN-1A EN-1A L | SUM-23 SUM-24 L | 11C10S25 —— | 9SMn30 11SMnPb30 | 1212/ 1213 12L15 |
Stainless Steel Bar Specifications | |||
|---|---|---|---|
ASTM A276 | This specification encompasses cold-finished or hot-finished bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. | ||
ASTM A479 | This specification includes cold and hot finished stainless steel bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels. | ||
ASTM A484 | This specification includes wrought stainless steel bars, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions. | ||
ASTM A582 | This specification includes cold or hot finished bars, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels. | ||
ASTM B473 | This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition. | ||
Our Grades :
AISI:
201, 202, 301, 302, 303, 304, 304H, 304L, 316, 316H, 316L, 309,
309S, 310, 310S, 316Ti, 317, 317L, 347, 321, 321H, 410, 416, 420,
430, 430F, 431, 440C, 630, 17-4PH, F51
DIN:
WNR1.4301, WNR1.4305, WNR1.4306, WNR1.4307, WNR1.4401, WNR1.4404,
WNR1.4571, WNR1.4541, WNR1.4828, WNR1.4841, WNR1.4845, WNR1.4449,
WNR1.4438, WNR1.4310, WNR1.4550, WNR1.4541, WNR1.4878, WNR1.4006,
WNR1.4005, WNR1.4021, WNR1.4028, WNR1.4016, WNR1.4104, WNR1.4105,
WNR1.4057, WNR1.4542, WNR1.4462
AISI ASTM | EN DIN | C % Max | Mn % Max | Si % Max | S % Max | P % Max | Cr % Max | Ni % Max | Mo % Max | Others % |
329 | 1.4401 | 0.08 | 2.00 | 1.00 | 0.030 | 0.045 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - |
| DENSITY (G/CM 3) | 8.0 |
| DENSITY (LB/IN 3) | 0.289 |
| MELTING POINT (°C) | 1400 – 1455 |
| MELTING POINT (°F) | 2550 – 2650 |
Tensile Strength : Unit – ksi (MPa) , Minimum
Yeild Strength : 0.2 % Offset , Unit – ksi (MPa) , Minimum
Elongation : in 2″, Unit : % , Minimum
Hardness : Rockwell , Maximum
| CONDITION & SIZE | TENSILE STRENGTH | YEILD STRENGTH | ELOGNATION | HARDNESS |
|---|---|---|---|---|
SS 329 | 75 (515) | 30 (205) | 35 | 90 |
