|
[China]
Trade Verify
Address: NO.288,YOUYI ROAD ,XI SHAN DISTRICT,WUXI CITY,CHINA
Contact name:Gao Ben
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
|
Verified Suppliers
|
|
|
ASTM A276 316L Round Bar 145-150MM Dia 6000MM Long Per 3.1 Black and Bright Polish
| AISI | EN / DIN | ASTM/UNS | EN | AFNOR | Reg.TM | Forging | |
| 316 | 1. 4401 | S31600 | X5CrNiMo17.12.2 | Z7CND17.11.02 | NA | A182 F316 | Austenite |
| 316L | 1. 4404 | S31603 | X2CrNiMo17.13.2 | Z3CND18.12.02 | NA | A182 F316L | Austenite |
Stainless steel 316/316L round bars are characterised by improved corrosion resistance in most acidic conditions, especially at higher temperatures and/or with chlorides present. Among 316 and 316L round bars 316L is more preferred for welded constructions. We are leading suppliers of “Dual Certified” stainless steel round bars meeting the requirements of both 316 and 316L.
Metline Industries is an ISO 9001: 2008 Certified manufacturer and supplier of 316/316L stainless steel round bars and stainless steel 316 rods, with a supply base to all destinations in India and worldwide. Metline stocks and supplies a full range of 316/316L stainless steel round bars from 8mm diameter to 600 mm forged bars with 1 meters to 6 meters length.
We specialise in the export of a wide range of 316L stainless steel bar stock products such as Steel Rounds, Squares, Hexagons, Bright Bars of various grades which are used as raw material by various manufacturers in engineering, forging, oil and gas components, drilling materials, tools & dies, as well as auto component industry.
Stainless Steel 316 is the standard molybdenum-bearing grade, second in importance to SS 304 amongst the austenitic stainless steels. The molybdenum gives SS 316 better overall corrosion resistant properties than Stainless Steel 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. Stainless Steel 316 has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. SS 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.
SS 316L, the low carbon version of SS 316 and is immune from sensitisation (grain boundary carbide precipitation).SS 316H, with its higher carbon content has application at elevated temperatures, same as SS 316Ti which is a Titanium stabilised grade .SS 316N is nitrogen enhanced with greater strength than SS 316 .
Metline is one of the world most reliable supplier of stainless steel round bars with shortest delivery times. It can be supplied in a range of sizes and finishes with varying tolerances. Cold-finished stainless steel bar is usually supplied to meet the international standards of ASTM A276, A484 or A582/A484M.
| Stainless Steel [SS] 316 / 316H / 316 L / 316N / 316Ti | |
| AISI | 316 / 316H / 316 L / 316N / 316Ti |
| UNS | S31600 / S31609 / S31603 / S31651 / S31635 |
| Werkstoff Nr. | 1.4401 / 1.4404 / 1.4432 / 1.4435 / 1.4429 / 1.4571 |
| SS | 316 | 316H | 316N | 316L | 316Ti |
|---|---|---|---|---|---|
| Ni | 10 – 14 | 10 – 14 | 10 – 14 | 10 – 14 | 10 – 14 |
| Fe | Balance | ||||
| Cr | 16 – 18 | 16 – 18 | 16 – 18 | 16 – 18 | 16 – 18 |
| Mo | 2 – 3 | 2 – 3 | 2 – 3 | 2 – 3 | 2 – 3 |
| C | 0.08 max | 0.10 max | 0.03 max | 0.03 max | 0.08 max |
| Si | 0.75 max | 0.75 max | 0.75 max | 0.75 max | 0.75 max |
| Mn | 2 max | 2 max | 2 max | 2 max | 2 max |
| P | 0.045 max | 0.045 max | 0.045 max | 0.045 max | 0.045 max |
| S | 0.030 max | 0.030 max | 0.030 max | 0.030 max | 0.030 max |
| N | 0.1 max | 0.1 max | 0.1 max | 0.1 max | |
| Ti | 5 X % (C + N) | ||||
| Density | 8.0 g/cm3 |
|---|---|
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 75000 , MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
| Elongation | 35 % |
| Standard | 316/316L, 1.4401, 1.4404 |
| Designation | ASTM A276, A479, ASME SA276, 479 |
| Range | 3 MM TO 350 MM DIA |
| Finish | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
Metline Industries is a leading supplier of cold drawn machined bright bars with highest level of dimensional accuracy, right mechanical properties, and excellent machining capabilities.
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
| Cold Drawn and Polish | 3.00 – 75.00 | 1/8” – 3.00” | h8-h9-h10-h11, ASTMA-484 |
| Cold Drawn and Ground | 10.00 – 75.00 | 5/6” – 2.50” | h8-h9-h10-h11 |
| Peeled and Polished | 40.00 – 150.00 | 1.50” – 6.00” | h11, ASTMA-484 h11-DIN 1013 |
| Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00” | h9-h10-h11, ASTMA-484 |
We can give Chamfering of 30 or 45 degrees on one or both the ends. For Strain-Hardened Bars, we can supply in B8(304) and B8M(316) in Class1 and Class2.
| Condition | Cold Drawn & Polished | Cold Drawn, Centreless Ground & Polished | Cold Drawn, Centreless Ground & Polished (Strain Hardened) |
| Grades | 201, 202, 303, 304, 304L, 310, 316, 316L, 321, 410, 420, 416, 430, 431, 430F & others | 304, 304L, 316, 316L | |
| Diameter (Size) | 2 mm to 5mm (1/8″ to 3/16″) | 6mm to 22m (1/4″ to 7/8″) | 10mm to 40mm (3/8″ to 1-1/2″) |
| Diameter Tolerance | h9 (Din 671),h11 ASTM A 484 | h9 (Din 671) ASTM A 484 | h9 (Din 671),h11 ASTM A 484 |
| Length | 3/4/5.6/6 meter (12/14ft/20feet) | 3/4/5.6/6 meter (12/14ft/20feet) | 3/4/5.6/6 meter (12/14ft/20feet) |
| Length Tolerance | -0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”) | -0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”) | -0/+200mm (-0 ”/+1 feet) |
We can manufacture and offer stainless steel hot rolled round bars and rods in “As rolled condition” or “Heat treated condition”. All products supplied by Metline Industries have passed IGC Practice E test, as well as UT Test.
| Condition | Peeled, Centre less Ground & Polished | Peeled & Polished | Peeled (Rough Turned) | Forged, Rough Turned |
| Grades | 201, 202, 303, 304, 304L, 310, 316, 316L, 321, 410, 420, 416, 430, 431, 430F & others | 304, 304L, 316, 316L, 410, 416, 420, 431 | 303, 304, 304L, 316, 316L, 410, 416, 420, 431 | |
| Diameter (Size) | 20mm to 85mm (3/4 ” to 3–1/4 ”) | 85mm to 140mm (3-1/4 ” to 4–3/4 ”) | 25mm to 140mm (1 ” to 5–1/2 ”) | 150mm to 400mm (6 ” to 16”) |
| Diameter Tolerance | h9 (Din 671) ASTM A 484 | h11 | K12/K13 (Din 1013) | -0mm/+3mm (-0 ”/+0.12 ”) |
| Length | 3/4/5.6/6 meter (12/14ft/20feet) | 3/4/5.6/6 meter (12/14ft/20feet) | 3/4/5.6/6 meter (12/14ft/20feet) | 3 meter -5 meter 10 feet -16 feet |
| Length Tolerance | -0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”) | -0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”) | -0/+1000mm or 500mm (-0 ”/+3 feet or +2 feet) | -0/+2 meter- -0/+6 feet |
