|
[China]
Trade Verify
Address: NO.288,YOUYI ROAD ,XI SHAN DISTRICT,WUXI CITY,CHINA
Contact name:Gao Ben
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
|
Verified Suppliers
|
|
|
Copper nickel alloy Monel 400 monel k500 plate / monel sheet
Monel K500
Monel K500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Monel K500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of -400 degrees Fahrenheit. Alloy K-500 also stays non-magnetic to -200 degrees Fahrenheit.
Compared with Monel 400,Monel K500 has more good mechanical
properties,hardness,corrosion resistance performance and long term stability.
It is widely used on many aspects,like pump shafts,oil well tools
and instruments,doctor blades and scrapers,springs,valve
trim,faseners,and marine propeller shafts.
Monel K500 International brand:
| Grade | USA | GE |
| UNS | SEW VDIUV | |
| Monel K500 | N05500 | W.Nr.2.4375 |
Chemical Composition:
| Grade | Ni% | Cu% | Al% | Ti% | Fe% | Mn% | S% | C% | Si% |
| Monle K500 | Min63 | 27-33 | 2.3-3.15 | 0.35-0.85 | Max2 | Max1.5 | Max0.01 | Max0.25 | Max0.5 |
Physical Properties:
| Grade | Density | Melting Point |
| Monel K500 | 8.05 g/cm3 | 1288°C-1343°C |
Mechanical Properties:
| Alloy | Tensile Strength Rm N/mm2 | Yield strength RP0.2N/mm2 | Elongation A5 % |
| Monel K500 | 1100 | 790 | 20 |
Production Standard:
| Monel K500 | Bar | Wire | Sheet/Strip | Forging | Welding Wire |
| Standard | ASTM B865 | AMS4676 | ASTM B865 | ASTM B564 | ERNiCu-7 |
Wire: 0.01-10mm
Ribbons: 0.05*0.2-2.0*6.0mm
Strip: 0.05*5.0-5.0*250mm
Bar: φ4-50mm;Length 2000-5000mm
Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm
Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
* Products Display *
* Products List *
Material/Grade : 304 321 316 316L 310S 309S 202 201 430 409L 444 410s 904L 2205
2507 Incoloy 800 800H 800HT 825 Inconel 600 625 718 Monel 400
Hastelloy C-276.etc
Our Service
| 1 | Free samples will be available for most of the products |
| 2 | 24 hours online to ensure your inquiry will be replied within 12 hours |
| 3 | Most products can be delivered within 7 days after order |
| 4 | Small trial order can also be accepted |
| 5 | Customized Size & Surface Treatment as your requirement |
| 6 | Quality Inspection---We can provide MTC , PMI inspection , and SGS inspection or other third Party Inspection . |
| 7 | If you are not sure about what exactly you need - feel free to contact us anytime and get professional assistance from us |
Contact : 24-hour online service
| Name | Bella Chen |
| Skype | |
1021030688 | |
13812005384 | |
86-13812005384 | |
|
