Shanghai Haosteel Co., Limited |
Verified Suppliers
|
|
Inconel 713 Nickel-Based alloy steel bar wire plate coil pipe Inconel 600 601 617 625 718 alloy steel
Inconel nickel base alloy 713 Nickel alloy steel round bar
The main products of this alloy are rods, tubes, plates, strips, wires and forgings, etc. It is mainly used in the chemical, petrochemical, nuclear and rare metal refining industries.
Uniform corrosion of inconel products can occur in acidic or hot
alkaline solutions. Through this mechanism you can predict the loss
and allow it in the design. When the corrosion rate of inconel
products is very slow, the metal is in a passive state, generally
with a higher corrosion resistance and a larger chromium content,
but other solutes can be harmful. Includes Inconel 100 Inconel600
Inconel601 Inconel602CA Inconel617 Inconel625 Inconel713 Inconel718
Inconel738 InconelX-750 alloy steel
Inconel nickel base alloy 713
Inconel 713 is a gamma prime precipitated nickel-based cast
superalloy. It has good creep strength, thermal fatigue resistance
and oxidation resistance below 900 °C. The composition of the alloy
is simple, contains no cobalt, and has a low density, usually used
in the as-cast state. The use of hot isostatic pressing (HIP)
treatment and subsequent heat treatment can improve the plasticity
and fatigue properties, and also restore the structure and
performance of parts after long-term use of tissue degradation and
performance degradation. Long-term aging at 800 °C will precipitate
a small amount of σ phase, but has no significant effect on
performance. The alloy is suitable for the manufacture of turbine
rotor blades, guide vanes and cast-mill turbines and other high
temperature parts for gas turbines operating below 900 °C.
Inconel 713 nickel-based alloy chemical composition:
Grade | Ni | Cr | Fe | C | Mn | Si | Nb | Mo | Al | Ti | P | S |
Inconel 713 | Re | 11.5~13.5 | ≤1.00 | 0.08-0.16 | ≤0.50 | ≤0.50 | 1.8~2.5 | 3.8~4.8 | 5.5~6.4 | 0.5-1.0 | ≤0.015 | ≤0.01 |
Specifications
Product Name | alloy steel bar wire plate coil pipe |
Production Process | Cold Drawn,Cold Rolled,Hot Rolled,Bright Anneal etc |
Size | 5.5-110mm(Hot rolled), 2-50mm(Cold drawn),110-500mm(Forged) |
Standard | ASTM EN DIN GB ISO JIS |
Tolerance | +/-0.05 ~+/0.02 |
Surface
| Pickling,Bright; No.1,2B,No.4,BA,8K
Satin,Brush,Hairline,Mirror,Polished 180 grits,320 grits,400 grits,600 grits,800 grits polished |
Application | Constructions feilds and ship building industries Petroleum,Chemical industries,War and electiciy industries. Food processing and medical industries. Boiler heat cxchangers,Machinery and hardware feilds. |
Materials | Titanium alloy:TI-6AL-4V,TI-5AL-2.5SN,TA1,TA2,TA3,TA4,TA0,TC4 200series:201 202 |
Heat treatment system As-cast use, or 1180 ° C, 2 h, air cooling + 930 ° C, 16 h, air cooling.