Shanghai Haosteel Co., Limited |
Verified Suppliers
|
|
ASTM 321 321H Stainless Steel Seamless Welded Pipe for China Supplier
321 stainless steel is equivalent to China's 0Cr18Ni10Ti stainless
steel pipe.
It is used to manufacture high quality carbon structural steel
seamless steel tubes for hot rolling and cold drawing (rolling) of
superheated steam pipe, boiling water pipe and locomotive boiler
superheated steam pipe, large smoke pipe, small smoke pipe and arch
brick.
Chemical Composition about stainless steel pipe
Type | Grade | Grade | Chemical Component % | |||||||
C | Cr | Ni | Mn | P | S | Si | Other | |||
321 | 0Cr18Ni10Ti | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.035 | ≤0.030 | ≤1.00 | Ti≥5*C% | |
321H | 1Cr18Ni9Ti6 | 0.04-0.1 | 17.00-19.00 | 8.00-11.00 | ≤2.00 | ≤0.035 | ≤0.030 | ≤1.00 | Ti5(C%-0.02) | |
~0.08 |
Diameter: 5-600mm Thickness: 0.3-50mm Length:
20mm-12meters.
Surface Accuracy
NO.1: surface treated with heat treatment and pickling after hot
rolling.
Generally used for cold rolling materials, industrial tank tanks,
chemical industrial equipment, etc.
NO.2D: matt cold rolled products obtained by heat treatment and
pickling after cold rolling.
Used for automobile parts, decoration materials, pipes, etc.
NO.2B: NO.2D products after temperature-adjusted rolling have
better gloss and flatness than NO.2D surfaces.
The surface treatment with improved mechanical properties satisfies
almost all USES.
NO.3: NO.2D surface is ground by NO. 100~120 grinding band, with
good gloss and discontinuous coarse grain.
Used for interior and exterior decoration, electrical products and
kitchen equipment, etc.
NO.4: NO.2D surface after 150~320 abrasive belt grinding products,
with better gloss and discontinuous coarse lines, stripes smaller
than NO.3.
Used for elevator decoration, kitchen equipment, interior and
exterior decoration, electrical products, etc.
HL: no.2d surface is continuously ground by polishing sand belt
with appropriate particle size, and products with long continuous
grinding stripes (subdivided 150~320).
Mainly used for building decoration, elevator decoration, etc.
BA: after cold rolling, a bright annealing is applied and the
product is obtained through leveling.
The surface has excellent gloss and high reflectance.
It's like a mirror surface.
Used for household appliances, mirrors, kitchen equipment,
decorative materials, etc.
Application
Used in the field machines of chemical, coal and petroleum
industries with high requirements for corrosion resistance in the
grain boundary, heat resistant parts of building materials and
parts with difficulty in heat treatment, such as:
1. Oil exhaust combustion pipeline
2. Engine exhaust pipe
3. Boiler shell, heat exchanger and heating furnace components
4. Silencing parts for diesel engines
5. Boiler pressure vessel
6. Chemical truck
7. Expansion joint
8. Spiral welded pipe for furnace pipe and dryer
9. Aircraft