Active Member
|
[China]
Address: 2/F Building 2,Li Zhou Technology Park, Dongcheng District, Dongguan , 523122 Guangdong China
Contact name:
Dongguan Kentie Bearing Co., Ltd. |
|
|
(Kentie) Insert Ball Bearings are made in 420 stainless steel. These bearings come with
Grub(Set) Screws, Are suitable for applications for both constant
and alternating directions of rotation.
Specifications of SUC204 Insert ball bearing
| Bearing Model | SUC204 Insert ball bearing |
| Outer Diameter | 47mm |
| Inner Bore | 20mm |
| Width | 31mm |
| Material | Stainless Steel AISI420 |
| Thread | M6*0.75 |
| Lubrication | Grease |
| Package | Plastic bag+carton |
Kentie Insert Ball Bearing Features:
Quick And Easy To Mount
The Different Locking Methods Enable Quick And Easy Mounting Of
Insert Bearings Onto The Shaft.
Accommodate Initial Misalignment
The Spherically Shaped Outside Surface Enables Initial Misalignment
By Tilting In The Housing.
Long Service Life
The Different Sealing Solutions Available Provide A Long Service
Life For A Wide Variety Of Applications With High Contamination
Levels.
Reduced Noise And Vibration Levels
Where High Requirements On Noise And Vibration Levels Are
Important, Kentie Can Provide The Appropriate Shaft Locking Method.
Stainless Steel Insert Ball Bearings SUC 200 Series
| Shaft Diameter | Model NO. | D1 | B | S | C | Ca | G | ds | Cr(KN) | Cor(KN) | Weightkg |
| 10 | SUC201 | 40 | 27.4 | 11.5 | 14 | 3.4 | 4 | M5×0.5 | 7.38 | 4.84 | 0.21 |
| 15 | SUC202 | 40 | 27.4 | 11.5 | 14 | 3.4 | 4 | M5×0.5 | 7.38 | 4.84 | 0.19 |
| 17 | SUC203 | 40 | 27.4 | 11.5 | 14 | 3.4 | 4 | M5×0.5 | 7.38 | 4.84 | 0.18 |
| 19.05 | SUC204-12 | 47 | 31 | 12.7 | 17 | 3.7 | 5 | M6×0.75 | 9.88 | 6.2 | 0.18 |
| 20 | SUC204 | 47 | 31 | 12.7 | 17 | 3.7 | 5 | M6×0.75 | 9.88 | 6.2 | 0.18 |
| 22.225 | SUC205-14 | 52 | 34.1 | 14.3 | 17 | 3.9 | 5 | M6×0.75 | 10.78 | 6.98 | 0.23 |
| 23.812 | SUC205-15 | 52 | 34.1 | 14.3 | 17 | 3.9 | 5 | M6×0.75 | 10.78 | 6.98 | 0.21 |
| 25 | SUC205 | 52 | 34.1 | 14.3 | 17 | 3.9 | 5 | M6×0.75 | 10.78 | 6.98 | 0.2 |
| 25.4 | SUC205-16 | 52 | 34.1 | 14.3 | 17 | 3.9 | 5 | M6×0.75 | 10.78 | 6.98 | 0.2 |
| 28.575 | SUC206-18 | 62 | 38.1 | 15.9 | 19 | 5 | 5 | M6×0.75 | 14.97 | 10.04 | 0.34 |
| 30 | SUC206 | 62 | 38.1 | 15.9 | 19 | 5 | 5 | M6×0.75 | 14.97 | 10.04 | 0.32 |
| 30.162 | SUC206-19 | 62 | 38.1 | 15.9 | 19 | 5 | 5 | M6×0.75 | 14.97 | 10.04 | 0.32 |
| 31.75 | SUC207-20 | 72 | 42.9 | 17.5 | 20 | 5.7 | 7 | M8×1 | 19.75 | 13.67 | 0.53 |
| 33.338 | SUC207-21 | 72 | 42.9 | 17.5 | 20 | 5.7 | 7 | M8×1 | 19.75 | 13.67 | 0.51 |
| 34.925 | SUC207-22 | 72 | 42.9 | 17.5 | 20 | 5.7 | 7 | M8×1 | 19.75 | 13.67 | 0.48 |
| 35 | SUC207 | 72 | 42.9 | 17.5 | 20 | 5.7 | 7 | M8×1 | 19.75 | 13.67 | 0.48 |
| 36.512 | SUC207-23 | 72 | 42.9 | 17.5 | 20 | 5.7 | 7 | M8×1 | 19.75 | 13.67 | 0.45 |
| 38.1 | SUC208-24 | 80 | 49.2 | 19 | 21 | 6.2 | 8 | M8×1 | 22.71 | 15.94 | 0.68 |
| 39.688 | SUC208-25 | 80 | 49.2 | 19 | 21 | 6.2 | 8 | M8×1 | 22.71 | 15.94 | 0.65 |
| 40 | SUC208 | 80 | 49.2 | 19 | 21 | 6.2 | 8 | M8×1 | 22.71 | 15.94 | 0.64 |
| 41.275 | SUC209-26 | 85 | 49.2 | 19 | 22 | 6.4 | 8 | M8×1 | 24.36 | 17.71 | 0.78 |
| 43.862 | SUC209-27 | 85 | 49.2 | 19 | 22 | 6.4 | 8 | M8×1 | 24.36 | 17.71 | 0.74 |
| 44.45 | SUC209-28 | 85 | 49.2 | 19 | 22 | 6.4 | 8 | M8×1 | 24.36 | 17.71 | 0.7 |
| 45 | SUC209 | 85 | 49.2 | 19 | 22 | 6.4 | 8 | M8×1 | 24.36 | 17.71 | 0.68 |
| 47.625 | SUC210-30 | 90 | 51.6 | 19 | 23 | 6.5 | 10 | M10×1.25 | 26.98 | 19.84 | 0.87 |
| 49.212 | SUC210-31 | 90 | 51.6 | 19 | 23 | 6.5 | 10 | M10×1.25 | 26.98 | 19.84 | 0.82 |
| 50 | SUC210 | 90 | 51.6 | 19 | 23 | 6.5 | 10 | M10×1.25 | 26.98 | 19.84 | 0.8 |
| 50.8 | SUC211-32 | 100 | 55.6 | 22.2 | 24 | 7 | 10 | M10×1.25 | 33.7 | 25.11 | 1.27 |
| 53.975 | SUC211-34 | 100 | 55.6 | 22.2 | 24 | 7 | 10 | M10×1.25 | 33.7 | 25.11 | 1.16 |
| 55 | SUC211 | 100 | 55.6 | 22.2 | 24 | 7 | 10 | M10×1.25 | 33.7 | 25.11 | 1.12 |
| 55.562 | SUC211-35 | 100 | 55.6 | 22.2 | 24 | 7 | 10 | M10×1.25 | 33.7 | 25.11 | 1.1 |
| 57.15 | SUC212-36 | 110 | 65.1 | 25.4 | 27 | 7.6 | 10 | M10×1.25 | 36.74 | 27.97 | 1.67 |
| 60 | SUC212 | 110 | 65.1 | 25.4 | 27 | 7.6 | 10 | M10×1.25 | 36.74 | 27.97 | 1.57 |
| 60.325 | SUC212-38 | 110 | 65.1 | 25.4 | 27 | 7.6 | 10 | M10×1.25 | 36.74 | 27.97 | 1.53 |
| 61.912 | SUC212-39 | 110 | 65.1 | 25.4 | 27 | 7.6 | 10 | M10×1.25 | 36.74 | 27.97 | 1.45 |
| 63.5 | SUC213-40 | 120 | 65.1 | 25.4 | 28 | 8.5 | 10 | M10×1.25 | 44.01 | 34.18 | 1.94 |
| 65 | SUC213 | 120 | 65.1 | 25.4 | 28 | 8.5 | 10 | M10×1.25 | 44.01 | 34.18 | 1.86 |
| 69.85 | SUC214-44 | 125 | 74.6 | 30.2 | 32 | 8.9 | 12 | M12×1.5 | 46.79 | 37.59 | 2.06 |
| 70 | SUC214 | 125 | 74.6 | 30.2 | 32 | 8.9 | 12 | M12×1.5 | 46.79 | 37.59 | 2.05 |
| 75 | SUC215 | 130 | 77.8 | 33.3 | 32 | 9.2 | 12 | M12×1.5 | 50.85 | 41.26 | 2.21 |
| 76.2 | SUC215-48 | 130 | 77.8 | 33.3 | 32 | 9.2 | 12 | M12×1.5 | 50.85 | 41.26 | 2.13 |
| 79.375 | SUC216-50 | 140 | 82.6 | 33.3 | 33 | 9.5 | 12 | M12×1.5 | 55.04 | 45.09 | 2.9 |
| 80 | SUC216 | 140 | 82.6 | 33.3 | 33 | 9.5 | 12 | M12×1.5 | 55.04 | 45.09 | 2.79 |
| 82.55 | SUC217-52 | 150 | 85.7 | 34.1 | 35 | 10.2 | 12 | M12×1.5 | 64.01 | 53.28 | 3.59 |
| 85 | SUC217 | 150 | 85.7 | 34.1 | 35 | 10.2 | 12 | M12×1.5 | 64.01 | 53.28 | 3.38 |
| 88.9 | SUC218-56 | 160 | 96 | 39.7 | 38 | 11.2 | 12 | M12×1.5 | 73.83 | 70.76 | 4.56 |
| 90 | SUC218 | 160 | 96 | 39.7 | 38 | 11.2 | 12 | M12×1.5 | 73.83 | 70.76 | 4.46 |
Q1: Are you a Manufacturer or trading company?
Answer: We are leading professional manufacturer of bearings since
1998 with ISO standards.
Q2: Can I get a sample to check out the quality?
Answer: Sure, free samples are available for stock products if you can pay
for the shipping cost.
Q3: Can you do OEM to print my logo/brand on the products?
Answer: Yes, we can print your logo/brand on the products, you just need
to send us your logo/brand files, we will show you how it looks
like.We can also make a custom package to your request.
Q4: How soon can I expect my order to be finished?
Answer: We have regular stock for standard bearings that can be shipped
right after your payment. It will take 15-60 days for a new
production order, which depends on your order quantity.
Q5: What if I receive defective products for my order?
Answer: All our bearings are 100% inspected strictly before packing. If
any defective products received, please provide photos and video to
show us the problem and help us improve the quality. New products
will be sent to you as replacement if the problem is product
quality.
