Active Member
|
[China]
Address: NO.12,JINGSAN ROAD,EASTERN INDUSTRIAL ZONE,ANPING COUNTY,HENGSHUI,HEBEI,CHINA.
Contact name:
Anping Blue Star Metal Wire Mesh Products Co., Ltd |
|
|
310S, SUS302, etc.
Knowledge of Stainless Steel Material
1. Mesh Count = 25.4mm/D+A
2. Aperture= 25.4mm/Mesh count - Diameter
3. % Open Area= A/(A+D)² X 100%
4. Micron= Aperture(mm) X 1000
5. Mesh – The number of openings per lineal inch.
6. Aperture- The distance between two adjacent wires
7. Diameter- The thickness of the wire before weaving
8. % Open Area- The ratio of the area of the aperture to the area of the 9.mesh expressed in percentage terms
10. Warp- All wires running lengthwise of the cloth as woven
11. Weft- All wires running across the cloth as woven
Weaving Type-Dutch weave
The diameter of warp and weft yarns is different, the mesh No. is also different, the warp yarn is thick and the weft yarn is thin, the density in warp is less and the density is weft is more. the length dorection is warp and the width direction is weft.
As usual, dutch weave can also be devided into plain dutch weave and Twill dutch weave
Plain Dutch Weave: similar with plain weave, just the weft and warp wire have different wire diameter and different mesh size.the weft wires are of smaller diameter than the warp wires. The wires are woven tightly together resulting in a small triangular opening. This weave produces a strong cloth with a small open area with a good flow rate, making it suitable for high pressure filtration.
Twill Dutch Weave: similar with twill weave, just the weft and warp wire have different wire diameter and different mesh size.it uses a double layer of weft wires woven as a twill pattern. Dutch weave is very strong, with a controlled flow rate and is suitable for where high pressure filtration is required.
Weaving Types show:
Common specification
Type | Mesh/Inch | Wire diameter (inch) | OPen Area | Weight (LB) / 100 Square Foot |
Plain Dutch Weave Wire Mesh | 8 × 85 - 80 × 400 | 0.014'' × 0.0126''- 0.0049'' × 0.0028'' | 318-340 to 43-48 | 250-255 to 35-40 |
Twill Duntch Weave Wire Mesh | 20 × 250 - 500 × 3200 | 0.0098'' × 0.0079'' - 0.0015'' × 0.0010'' | 110-120 to 8-9 | 98-105 to 2-3 |
Part specific specification show
| Stainless Steel Wire Cloth, Dutch Weave | ||
| Mesh | Wire Dia. (MM) | Material (AISI) |
| 12mesh x 64mesh | 0.58 x 0.40 | 304 or 316 |
| 24mesh x 110mesh | 0.36 x 0.25 | 304 or 316 |
| 14mesh x 88mesh | 0.50 x 0.33 | 304 or 316 |
| 30mesh x 150mesh | 0.23 x 0.18 | 304 or 316 |
| 40mesh x 200mesh | 0.18 x 0.13 | 304 or 316 |
| 50mesh x 250mesh | 0.14 x 0.11 | 304 or 316 |
| 80mesh x 700mesh | 0.10 x 0.08 | 304 or 316 |
| 165mesh x 800mesh | 0.071 x 0.040 | 304 or 316 |
| 165mesh x 1400mesh | 0.06 x 0.04 | 304 or 316 |
| 200mesh x 1800mesh | 0.05 x 0.032 | 304 or 316 |
| 825mesh x 2300mesh | 0.035 x 0.025 | 316L |
| 400mesh x 2800mesh | 0.030 x 0.02 | 316L |
Packing
Paper tube for each roll and then waterproof plastic, finally wooden case or according to your requirements.
