Stainless Steel Globe Valve Straight Body Din Globe Valve Metal Seal DN300 With Bolted Bonnet Rising Stem

Stainless Steel Globe Valve Straight Body Din Globe Valve Metal Seal DN300 With Bolted Bonnet Rising Stem

1. Standards

2. The Features of Globe Valve
Bolted Bonnet: Outside Screw and Yoke: Rising stems: Metallic seating surfaces

3. Body and Bonnet Connection
Bolted bonnet;

Pressure seal bonnet design.

4. Bonnet Gasket Style

Stainless steel + flexible graphite wounded gasket;

5. Packing Seal
As usual, flexible graphite is used for packing material. PTFE or combined packing material can be also used if being requested by the customer.

6. Stem Design

The stem is of integral forged design. The minimum diameter of the stem shall per the standard requirement.

7. Backseat Design

All globe valves have the backseat design. In most cases, the carbon steel globe valve is fitted with a renewable backseat. For stainless steel globe valve, the backseat is machined directly in the bonnet or is machined after welding. When the globe valve is at fully open position, the sealing of the backseat can be very reliable.

8. Seat

For carbon steel globe valve, the seat is usually forged steel. The sealing surface of the seat is spray welded with hard alloy specified by the customer. For Stainless steel globe valve, integral seat is usually adopted, or to weld hard alloy directly integrally. Threaded or welded on seat is also optional for stainless steel globe valve if being requested by the customer.

9. Stem Nut

Usually, the stem nut is made of ASTM A439 D2. it is also can be made of copper ally if being requested by the customer.

10. Operation

In most of cases, handwheel & gearbox is usually used for globe valve operatrion. Chain wheel and electric actuator can be also used for globe valve operation if being requested by the customers.

11. Other Globe Valves

Besides the common globe valves, we also makes cryogenic globe valve, Bellow sealed globe valve, Jacketed globe valve, etc.