|
[China]
Trade Verify
Address: No.208,Lvdi Road,Baihe Town,Qingpu District,Shanghai,China
Contact name:TOBO
TOBO STEEL GROUP CHINA |
|
Verified Suppliers
|
|
|
316/304 Inner Ring Type B/Rir Filler Graphite Flat Metal Spiral Wound Gasket
FILLED MATERIAL AND MAIN PROPERTIES
| Filler | Temperature(ºC ) | Max Pressure | Media | Compression(% ) | Rebound(% ) | Relaxation(%) |
| F.G. | -220--550 | 250 BAR | corrosive | 18--30 | ≥17 | ≤18 |
| ASB | -150--450 | 100 BAR | vulgaris air tightness | 18--30 | ≥19 | ≤28 |
| PTFE | -200-- 250 | 100 BAR | corrosive | 18--30 | ≥15 | ≤13 |
| NAF | -100--350 | 100 BAR | vulgaris air tightness | 18--30 | ≥19 | ≤28 |
| MICA | -150--800 | 100 BAR | H-TEMP | 18--30 | ≥19 | / |
| CER | -200--1090 | 100 BAR | Ultra-TEMP | 18--40 | ≥19 | / |
MATERIALS FOR OD AND ID,MAIN PROPERTIES
| Materials | Mark | Hardness(HB) | Temperature(°C) |
| Carbon steel | CS | 120 | -40~+540 |
| SUS 304 | 304 | 130~180 | -195~+550 |
| SUS 316L | 316L | 130~180 | -100~+550 |
| SUS 321 | 321 | 130~190 | -195~+760 |
| HASTELLOR-B2 | HASTB | 215 | -185~+1090 |
| INCONEL-600 | INC600 | 150 | -100~+1090 |
| MONEL-400 | MON | 150 | -130~+820 |
| Ti | T2 | 215 | -195~+1090 |
Basic construction type, inner and outer diameters are reinforced
with several piles of metal without filler to give greater
stability and better compression characteristics. - Suitable for
tongue and groove, male and female or grooved to flat face flange
assemblies.
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
Inner & Outer Rings Type
| Type | Thickness(mm) | |
| Basic form | 3.2 | 4.5 |
| With inner ring | 4.5 | |
| With outer ring | 4.5 | |
| With inner and outer ring | 4.5 | |
| Filler | Hoop | Inner ring | Outer ring |
| Asbestos | SUS 304 | Carbon steel | Carbon steel |
| Graphite | SUS 316 | SUS 304 | SUS 304 |
| PTFE | SUS 316L | SUS 316 | SUS 316 |
| SUS 316L | SUS 316L |
| Flange type | Spiral Wound Gasket form |
| Flat face flange(F.F) | Gasket with an outer ring |
| Gasket with an inner and outer ring | |
| Raised face flange(R.F) | Gasket with an outer ring |
| Gasket with an inner and outer ring |
