Active Member
|
[China]
Address: Binhai Third Road,Yongxing Street ,Longwan District ,Wenzhou City ,Zhejiang ,China
Contact name:Charlie Tao
WenZhou Yinuo Machinery Co.,Ltd. |
|
|
Liquid Extraction Solvent Equipment Cold Alcohol Sediment Tank For Liquid-Liquid Separator
Sediment Tank is used in purifying traditional herbal medicine, oral liquid, food health products etc. it is the key equipment of precipitation process. It is also suitable for freezing, normal temperature precipitation and solid-liquid phase separation of suspensions in other pharmaceutical, chemical, food, oral liquid, health products.
Sediment Tank belongs to settling solid-liquid phase separation equipment. as the working proceed should be like as below :
1). Herbal extractor medicine decoction concentrate (general specific gravity is about 1.1) is prepared into a certain solvent liquid , and then separate the solid and liquid at room temperature or it is best at by freezing sedimentation at low temperature to improve sediment proceed and clarity of herbal extract, so as to improve the product quality.
2). According to the process requirements, the concentrated solution and solvent shall be put into their respective proportions and the chilled brine or cooling water shall be turned on jacketed of the sediment tank . The mixing shall be uniform. When the required temperature of the feed liquid is reached, the mixing shall be stopped. The chilled brine or cooling water shall be continuously introduced into the jacket to ensure the required liquid temperature.
3). After the sedimentation is completed, open the supernatant discharge valve, and use the self-priming pump to extract the supernatant. Because the floating ball type liquid ejector is installed inside, the supernatant level will gradually drop with the supernatant level, and the floating ball will also drop with the liquid level. After the supernatant is pumped out, because the density of the cloud liquid is far greater than the supernatant, the floating ball will not drop on the surface of the sediment, and the liquid ejector will automatically stop discharging. At this time, the slag outlet can be opened to discharge the sediment. According to different precipitates of different materials, the bottom butterfly valve can be opened first to discharge the thinners.
Sediment Tank have the following functions:
1) Jacketed can use the chiller system to cool in very low temperature ,it can make the precipitation process much fast and effective
2) Top mounted propeller type agitator which can adjust the agitator speed to fit the different process.
3) Shell side solution discharge system can discharge the upper solution easily and conveniently
4) Bottom sediment particle outlet nozzle with the pneumatic cylinder door to discharge easily .
Sediment Tank Technology data Specification :
Model Item | CCG-500 | CCG-1000 | CCG-2000 | CCG-3000 | CCG-6000 |
| Tank volume:L | 500 | 1000 | 2000 | 3000 | 6000 |
| jacket cooling area M2 | 2.8 | 4.2 | 7.5 | 10 |
15.5 |
| Inside shell temperature C | -90 ---room temperature | ||||
| Inside shell pressure MPa | -0.9/0.3 | ||||
| Jacket pressure MPa | 0.3 | ||||
| Agitator speed RPM | 0-200 | ||||
| Motor power Kw | 1.1 | 1.5 | 2.2 | 4.0 | 7.5 |
1. Polishing:
Polishing is vital for tanks. Tanks should be polished wholly
inside and outside.
Therefore it can ensure there is no place for the bacteria to hide
in tanks.
Our polishing system consists of auto and semi-auto polishing
machine and manual polishing.
Each tank is polished three times and more polish for the key
place.
2. Welding:
Our argon central system for welding provides 100% pure argon to
protect tanks from distorting during welding
SERVICE
We have established some overseas agent office to make the after-sales serivce already ,so it can will be service client in fast response .also in our headquarter service team ,there is a expert team which can support client in 7*24 hours .
1. Customer inquiry and consultation (URS documents)
2. Confirmation of treatment plan (DQ documents &PID Drawing)
3.Quotation offer with the technolgy document (Quotation PI )
4.Engineering and Manufacturing (Prodcution &Quality inspection )
5. Product inspection (FAT documents)
6. Delivery arrangement and loading work (full set Shipment documents)
7. After-sales service (OQ,PQ ,SAT documents)
FAQ:
1. What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.
2. How will your company control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .
3. How long the warranty will be?
We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .
4. Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.
5. Can we become your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.
6. Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life .
2. We decrease the consumption cost of the product in the ruuning.
3. We improve research personnel's ability to deliver a creative design;
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.
7. Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
8. Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
9. How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here
10. What is kind service do you offer before making order ?
1. according to your company URS ,we will make the design drawing accoridingly.
2. after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.
11. how about your company after-sale serivce ?
1. We provide long-term after-sale service.
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.
