Fast Assembly Sanitary Diaphragm Valves , TP 316L 3 Way Diaphragm Valve

Fast Assembly Sanitary Diaphragm Valves , TP 316L 3 Way Diaphragm Valve

HYHAU can offer All types of sanitary stainless steel flow control equipment for the food & beverage, dairy, cosmetic, biotechnology, pharmaceutical, and electronic processing industries.

The diaphragm provides the body seal as well as the seat seal. There are no paths to the outside environment and, as such, the valve is suitable for aseptic processes. When the valve is being closed, a pressure pad which supports the diaphragm moves towards the sealing face on the body. As the pressure plate moves, the diaphragm flexes and is forced down onto the seat area in the centre of the body, thus, closing off the flow path through the body.

The valve can be actuated either manually or pneumatically and controlled by control units and solenoid valves.

A standard diaphragm valve is used to shut the flow of a line, an NDL type valve shuts only one outlet of the main line.

Applications:

Diaphragm valves, ,manually or pneumatically operated, are specially designed to use on hygienic and aseptic processes in the pharmaceutical industries, The valves is excellent for flow control as well as for on/off duties. Diaphragm valves are widely applied to CIP/SIP.

Specification:

Sizes available from 3/4" to 3" (3/4", 1", 1 1/2", 2" 2 1/2", 3")
DN20-DN80 (DN20, DN25, DN40, DN50, DN65, DN80)

Valve body: AISI 316L.

Valve seat: EPDM+PTFE

Max. working pressure: 145psi (10bar)

Working temperature range: -22 ~ 266°F (-30 ~ 130°C), or higher upon request.

Inside treatment: Ra 16-32μin (0.4-0.8μm), Ra 25 (0.5μm) is the default.

2-way body 3-way body

The diaphragm provides the body seal as well as the seat seal. There are no paths to the outside environment and as such the valve is suitable for aseptic processes.

As the valve is closed a pressure pad which supports the diaphragm moves towards the sealing face on the body. As the pressure plate moves the diaphragm flexes and is forces down onto the seal area in the centre of the body thus closing off the flow path through the body.

The inter-relationship of body to the pressure plate prevents over compression of the diaphragm. The valve can be actuated either manually or pneumatically are controlled by control tops and solenoid valves.

Technical parameters:

Working temperature: -10℃ to +120℃

Parts in contact with the handling material: SS316L,

Other stainless steel parts: SS304

Sizes Range:

Technical Specifications: