Sanitary Stainless
Steel Food Grade juice beverage screw pump
Product Description
The screw pump is a volumetric rotor pump. It relies on the volume
change of the sealing cavity formed by the screw and bushing to
suck and discharge the liquid. The screw pump is divided into
single screw pump, double, three and five screw pumps according to
the number of screws. Screw pump is characterized by stable flow,
small pressure pulsation, self-priming, low noise, high efficiency,
long life and reliable work. The outstanding advantage of the screw
pump is that it does not form eddy current and is insensitive to
the viscosity of the medium, and can deliver high viscosity medium.
Product Name: | Sanitary Stainless Steel Food Grade juice beverage screw pump |
Material: | SS304/SS316L/1.4301/1.4404 |
Seal Material: | EPDM (Standard) |
Max. Flow: | 60m3/h |
Max.Pressure: | 0.6Mpa |
Max. working temperature: | 150 C / 302 F |
Max. rev: | 960 rmp |
Self suction height : | 6m above |
Allow the grain diamater: | 150mm |
Mechanical seal: | SIC/SiC/EPDM(Standard) |
Motor power: | 0.55kw-15kw |
Sealing option: | Sanitary single mechanical seal/Double mechanical seal with cooling
system |
Voltage: | 220V, 240V,380V,440V |
Motor: | ABB, 50hz/ 60hz |
Surface treatment: | Inner polished and Sandblast outside |
Availably connection: | Clamp, Thread Butt weld, Flange |
Availably standard: | DIN, SMS, 3A, RJT, ISO/IDF |
Application: | Dairy and food industrial,honey,chocolate,jam with high viscosity |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: No.
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 50%
T/T in advance ,balance before shippment.
Packaging & Shipping
Wooden box ,shipping by sea or air.
Common problem handling
1. pump body vibrate or produce noise:
The cause is: the pump is not installed firmly or the pump is
installed too high; the ball bearing of motor is damaged; the
spindle of the pump is bent or is not concentric and parallel with
the motor spindle.
Treatment methods: install the water pump or reduce the
installation height of the pump; replace the motor ball bearing;
correct the bending of the main shaft of the pump or adjust the
relative position of the pump and the motor.
2. the drive shaft or motor bearing is overheated.
Causes: lack of lubricating oil or bearing rupture.
Treatment: add lubricating oil or replace bearing.
3. water pump does not come out of water.
The reason is that the pump body and suction pipe are not filled
with water, and the dynamic water level is lower than the water
filter pipe, and the suction pipe ruptures.