Beijing Bartool Tech Co., Ltd. |
|
5L double wall vacuum insulated containers keg beer dispenser tap
kit
Specification
Dimension | 8.1 x 8.1x 16.1 inches |
Capacity | 5 L |
Weight | 6.5 Lbs |
16g CO2 Cylinder | Not included, no thread. |
Max Rated PSI | 8 psi |
Max Withstand PSI | 75 psi |
Feature
1. STAYS FRESH - patented carbonation system automatically maintains freshness and optimal carbonation for weeks.
2. STAYS COLD - double wall stainless steel vacuum insulation keeps beverages cold all day.
3. STAYS CARBONATED - streamlined regulator cap allows you to choose high or low carbonation setting to match the beverage you're serving.
4. CO2 CHARGERS NOT INCLUDED - uses food grade 16 gram non-thread CO2 chargers sold separately.
5. SERVE WITH STYLE - easy operate dispenser tap provides easy pouring.
6. SAVE MONEY - make your own flavored beverages at home.
Application
1. Enjoy beer with the one you love.
2. Take beer to anywhere, such as BBQ, hiking, beaching, hiking
etc.
3. A perfect gift for holiday, such as Father's Day, Christmas etc.
FAQ
Q1: Does this have a cooling system or will it fit in the fridge?
A1: It doesn't have it's own cooling system. The best way, is move
shelf around in refrigerator and store it in there.
Q2: When you draft your beer it says to have it at 3-5psi. When you
are done, do you turn the regulator knob off or leave it at 3-5
psi?
A2: I leave it on to keep the beer properly carbonated, while using
the keg system, no need to turn off; after finishing dispensing, it
is better to turn off and put in fridge.
Q3: At what pressure is the safety regulator valve regulated?
A3: The CO2 System: 30 PSI, Safety Pressure Regulated. When the
pressure within the keg reaches 30 psi, the pressure relief valve
will release excessive CO2 automatically.
Q4: Can you use this system for making sparkling wine?
A4: Yes, of course, are you thinking of pouring pre-carbonated wine
into it? Wine has a higher carbonation level than beer so the
cartridge might not last as long.
Q5: I've been getting a lot of foam when pouring. I even hold glass
at a angle. I have it set at 5 psi. Is there anything im doing
wrong/ I can correct?
A5: Pls turn off regulator, and pull on Pressure relief valve for a
few seconds to optimize the inner pressure, then reset 5PSI, that
would work better for you!