Home Companies Jiangsu Pucheng Metal Products Co.,Ltd.

High Temperature Inconel Bar Rod 600mm Corrosion Resistant Structural Materials

Contact Us

[China]

Trade Verify

Address: Liangxi District Wuxi ,Jiangsu,China.

Contact name:Helen

Jiangsu Pucheng Metal Products Co.,Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

High Temperature Inconel Bar Rod 600mm Corrosion Resistant Structural Materials

Country/Region	china
City & Province	wuxi jiangsu
Categories	Nickel

Product Details

Inconel 600 601 625 718 X750 Bar/Rod For Corrosion Resistant Structural Materials

Inconel 600 alloy is a nickel-chromium-iron-based solid solution strengthened alloy with good high temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding properties, and has satisfactory thermal strength and high plasticity below 700 ℃. Inconel 600 material is the most commonly used material in structural engineering because it is well suited for high temperatures above 1000°F (540°C). Inconel 600 is durable, stable, strong and corrosion resistant. Inconel 600 is also known as a superalloy due to its strong properties, such as its excellent performance under enormous mechanical stress and temperature, and its resistance to oxidation and creep. Inconel 600 (UNS N06600) is also used in parts and accessories for heat treatment furnaces, heat exchangers, etc.

Inconel 625 is an alloy grade with a density of 8.4 g/cm3 and a melting point of 1290-1350 °C. It has excellent corrosion resistance to inorganic acids, and has excellent corrosion resistance to various corrosive media in oxidative and reducing environments. The softened and annealed low carbon alloy 625 is widely used in the chemical process industry, and its better corrosion resistance and high strength enable it to be used as a thinner structural component.

Inconel 718 (N07718) is an iron-nickel-chromium-based precipitation hardening deformed superalloy. The long-term service temperature range is -253 ~ 650°C, and the short-term service temperature is 800°C. It has high strength and good toughness below 650°C. The unique formulation of Inconel 718 increases strength and corrosion resistance while providing easy machinability and ease of weldability. Inconel 718 alloy has been used to manufacture rings, blades, standard parts and structural parts in the aerospace, aerospace and energy industries. Inconel 725 is a nickel-chromium-molybdenum-niobium alloy with excellent corrosion resistance. After aging heat treatment, the strength of the alloy can be greatly increased, and the ductility and tensile strength of the alloy can be greatly improved. The alloy also has strong resistance to stress corrosion, and is mainly used in pipe fittings, joints and bearings in acid-resistant equipment, and is also widely used in marine equipment.

Inconel X-750 alloy is mainly a nickel-based superalloy that is age-strengthened with γ" phase. It has good corrosion resistance and oxidation resistance below 980 °C, high strength below 800 °C, and good corrosion resistance below 540 °C. Relaxation resistance, good formability and welding performance. The alloy is mainly used to manufacture flat springs and coil springs that are resistant to relaxation and require high strength for aero-engines that work below 800 °C. It can also be used to manufacture turbine blades And other parts. The varieties that can be supplied are plate, strip, bar, forging, ring, wire and pipe.

Product Name	Inconel 600 601 625 718 X750 Bar/Rod For Corrosion Resistant Structural Materials
Type:	Bar/Rod
Outer Diameter	10-600mm (3/8"-25")
Length	3000mm, 5800mm, 6000mm,12000mm,etc
Standard	ASTM,JIS, AISI, GB, DIN, EN
Surface	BA,2B,NO.1,NO.4,HL
Application	It is widely used in high-temperature and electric industry, medical devices, construction, chemistry, food industry, agriculture, and ship components.
Application	It also applies to food and beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen mesh etc.
Certification	ISO, SGS, BV
Technique	Cold Rolled /Hot Rolled/ Casting
Edge	Mill Edge/Slit Edge
Grade (ASTM UNS)	N08020,INCOLOY Alloy 20, N08028,INCOLOY Alloy 28, N08330,INCOLOY, Alloy 330, N08800, INCOLOY Alloy 800, N08810, INCOLOY Alloy 800H, N08825, INCOLOY Alloy 825, N06600, Inconel 600, N06601, Inconel 601, N06625, Inconel 625, INCOLOY Alloy 625, N07718, Inconel 718,INCOLOY Alloy 718,N07750,Inconel X750,N04400,MONEL400, Nickl200, S66286, N10276, Hastelloy C-276, N06455, Hastelloy C-4,N06022,Hastelloy C-22,N10665,Hastelloy B-2,N10675, Hastelloy B-3, N06030, Hastelloy G-30, INCOLOY Alloy A286, N08926, INCOLOY Alloy 25-6Mo etc.
Grade (EN)	2.4060 1.4980 1.4529 2.4460 1.4563 1.4886 1.4876 1.4876 2.4858,2.4816 2.4851 2.4856 2.4856 2.4668 2.4669 2.4360 2.4375 2.4819 2.4610 2.4602 2.4617 2.4660 etc.
Packaging Details	In bundle,plastic bags,thin film,wooden pallet,standard seaworthy export packing or as customer demands
Container Dimension	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM
	40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM
	40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM

Chemical Composition

Grade	Ni,Min	Cu	Mo	Mn	C	Si	S	Cr	Al	Ti	V	Nb
UNS N02200	99.0	0.25	-	0.35	0.15	0.35	0.001	-	-	-	-	-
N04400 (Monel400)	63.0	28.0-34.0	-	2.00	0.30	0.50	0.024	-	-	-	-	-
UNS N06600 (Inconel600)	72.0	0.50	-	1.00	0.15	0.50	0.015	14.0-17.0	-	-	-	-
UNS N06601 (Inconel601)	58.0-63.0	1.00	-	1.00	0.10	0.50	0.015	21.0-25.0	1.0-1.7	-	-	-
UNS N06625 (Inconel625)	58.0	-	8.0-10.0	0.5	0.10	0.50	0.015	20.0-23.0	0.40	0.40	-	Nb+Ta:3.15-4.15
UNS N06690 (Inconel690)	58.0	0.50	-	0.5	0.50	0.50	0.015	27.0-31.0	-	-	-	-
UNS N08020 (Alloy 20)	32.0-38.0	3.0-4.0	2.0-3.0	2.0	0.07	1.00	0.035	19.0-21.0	-	-	-	Nb+Ta:8xC-1.00
UNS N08028 (Alloy 28)	30.0-34.0	0.6-1.4	3.0-4.0	2.5	0.03	1.00	0.030	26.0-28.0	-	-	-	-
UNS N08800 (Incoloy800)	30.0-35.0	0.75	-	1.5	0.10	1.00	0.015	19.0-23.0	0.15-0.60	0.15-0.60	-	-
UNS N08810 (Incoloy800H)	30.0-35.0	0.75	-	1.5	0.05-0.10	1.00	0.015	19.0-23.0	0.15-0.60	0.15-0.60	-	-
UNS N08811 (Incoloy800HT)	30.0-35.0	0.75	-	1.5	0.06-0.10	1.00	0.015	19.0-23.0	0.15-0.60	0.15-0.60	-	-
UNS N08825 (Incoloy825)	38.0-46.0	1.5-3.0	2.5-3.5	1.0	0.05	0.50	0.030	19.5-23.5	0.20	0.6-1.2	-	-
UNS N06022 (Hastelloy C-22)	Surplus	-	12.5-14.5	0.5	0.015	0.08	0.020	20.0-22.5	-	-	0.35	-
UNS N10276 (Hastelloy C-276)	Surplus	-	15.0-17.0	1.0	0.01	0.08	0.030	14.5-16.5	-	-	-	-
UNS N10665 (Hastelloy B-2)	Surplus	-	26.0-30.0	1.0	0.02	0.10	0.030	1.00	-	-	-	-
UNS N10673 (Hastelloy B-3)	65.0	-	27.0-32.0	3.0	0.01	0.10	0.010	1.0-3.0	-	-	0.20	0.02

Mechanical Properties

Grade	Tensile Strength	Yield Strength	Ductility	HRB
UNS N02200
Anneales	379	103	40	-
Stress-relieved	448	276	15	B65
N04400(Monel400)
Anneales	483	193	35	-
Stress-relieved	586	378	15	B65
UNS N06600(Inconel600)	552	241	30	-
UNS N06601(Inconel601)	552	207	30	-
UNS N06625(Inconel625)
Gr.1	827	414	30	-
Gr.2	690	276	30	-
UNS N06690(Inconel690)	586	241	30	-
UNS N08020(Alloy 20)	551	241	30	-
UNS N08028(Alloy 28)	500	214	40	-
UNS N08800(Incoloy800)
Annealed	518	207	30	-
Cold-Worked	572	324	30	-
UNS N08810(Incoloy800H)	448	172	30	-
UNS N08811(Incoloy800HT)	448	172	30	-
UNS N08825(Incoloy825)	241	586	30	-
UNS N06022(Hastelloy C-22)	690	310	45	-
UNS N10276(Hastelloy C-276)	690	283	40	-
UNS N10665(Hastelloy B-2)	760	350	40	-
UNS N10673(Hastelloy B-3)	760	350	40	-

Detail Photos

Certification

Packing & Shipping

FAQ

Q1: ARE YOU FACTORY OR TRADER?
A1: Our company is a cold rolling manufacturer of magnetic stainless steel coil since 2009. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.

Q2: WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?
A2: Stainless Steel Coils / Strips, Stainless Steel Sheets / Plates, Stainless Steel Circles / Discs, Decorative Stainless Steel Sheets.

Q3: HOW TO GET A SAMPLE?
A3: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.

Q4: HOW TO VISIT YOUR FACTORY?
A4: Most of the main cities have flights to Wuxi; you can take flight to Wuxi Shuofang International Airport.
If you come from Shanghai, it will take 2 hours by flight (every day 5 flights).
If you come from Hongkong, it will take 1 hour by flight (every day 1 flight around noon time).