Jiangsu Pucheng Metal Products Co.,Ltd. |
Verified Suppliers
|
|
20mm 40mm 60mm Nickel-Chromium-Based Super Alloys Inconel 600 Round
Bar
Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel's high-temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Product Name | Nickel-Chromium-Based Super alloys Inconel 600 Round Bar |
Type: | Bar/Rod/Shaft |
Outer Diameter | 10-600mm (3/8"-25") |
Length | 3000mm, 5800mm, 6000mm,12000mm,etc |
Standard | ASTM,JIS, AISI, GB, DIN, EN |
Surface | BA,2B,NO.1,NO.4,HL |
Application | It is widely used in high-temperature and electric industry, medical devices, construction, chemistry, food industry, agriculture, and ship components. |
It also applies to food and beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen mesh etc. | |
Certification | ISO, SGS, BV |
Technique | Cold Rolled /Hot Rolled/ Casting |
Edge | Mill Edge/Slit Edge |
Grade (ASTM UNS) | N08020,INCOLOY Alloy 20, N08028,INCOLOY Alloy 28, N08330,INCOLOY, Alloy 330, N08800, INCOLOY Alloy 800, N08810, INCOLOY Alloy 800H, N08825, INCOLOY Alloy 825, N06600, Inconel 600, N06601, Inconel 601, N06625, Inconel 625, INCOLOY Alloy 625, N07718, Inconel 718,INCOLOY Alloy 718,N07750,Inconel X750,N04400,MONEL400, Nickl200, S66286, N10276, Hastelloy C-276, N06455, Hastelloy C-4,N06022,Hastelloy C-22,N10665,Hastelloy B-2,N10675, Hastelloy B-3, N06030, Hastelloy G-30, INCOLOY Alloy A286, N08926, INCOLOY Alloy 25-6Mo etc. |
Grade (EN) | 2.4060 1.4980 1.4529 2.4460 1.4563 1.4886 1.4876 1.4876 2.4858,2.4816 2.4851 2.4856 2.4856 2.4668 2.4669 2.4360 2.4375 2.4819 2.4610 2.4602 2.4617 2.4660 etc. |
Packaging Details | In bundle,plastic bags,thin film,wooden pallet,standard seaworthy export packing or as customer demands |
Container Dimension | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM |
40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM | |
40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM |
Chemical Composition
Grade | Ni,Min | Cu | Mo | Mn | C | Si | S | Cr | Al | Ti | V | Nb |
UNS N02200 | 99.0 | 0.25 | - | 0.35 | 0.15 | 0.35 | 0.001 | - | - | - | - | - |
N04400 (Monel400) | 63.0 | 28.0-34.0 | - | 2.00 | 0.30 | 0.50 | 0.024 | - | - | - | - | - |
UNS N06600 (Inconel600) | 72.0 | 0.50 | - | 1.00 | 0.15 | 0.50 | 0.015 | 14.0-17.0 | - | - | - | - |
UNS N06601 (Inconel601) | 58.0-63.0 | 1.00 | - | 1.00 | 0.10 | 0.50 | 0.015 | 21.0-25.0 | 1.0-1.7 | - | - | - |
UNS N06625 (Inconel625) | 58.0 | - | 8.0-10.0 | 0.5 | 0.10 | 0.50 | 0.015 | 20.0-23.0 | 0.40 | 0.40 | - | Nb+Ta:3.15-4.15 |
UNS N06690 (Inconel690) | 58.0 | 0.50 | - | 0.5 | 0.50 | 0.50 | 0.015 | 27.0-31.0 | - | - | - | - |
UNS N08020 (Alloy 20) | 32.0-38.0 | 3.0-4.0 | 2.0-3.0 | 2.0 | 0.07 | 1.00 | 0.035 | 19.0-21.0 | - | - | - | Nb+Ta:8xC-1.00 |
UNS N08028 (Alloy 28) | 30.0-34.0 | 0.6-1.4 | 3.0-4.0 | 2.5 | 0.03 | 1.00 | 0.030 | 26.0-28.0 | - | - | - | - |
UNS N08800 (Incoloy800) | 30.0-35.0 | 0.75 | - | 1.5 | 0.10 | 1.00 | 0.015 | 19.0-23.0 | 0.15-0.60 | 0.15-0.60 | - | - |
UNS N08810 (Incoloy800H) | 30.0-35.0 | 0.75 | - | 1.5 | 0.05-0.10 | 1.00 | 0.015 | 19.0-23.0 | 0.15-0.60 | 0.15-0.60 | - | - |
UNS N08811 (Incoloy800HT) | 30.0-35.0 | 0.75 | - | 1.5 | 0.06-0.10 | 1.00 | 0.015 | 19.0-23.0 | 0.15-0.60 | 0.15-0.60 | - | - |
UNS N08825 (Incoloy825) | 38.0-46.0 | 1.5-3.0 | 2.5-3.5 | 1.0 | 0.05 | 0.50 | 0.030 | 19.5-23.5 | 0.20 | 0.6-1.2 | - | - |
UNS N06022 (Hastelloy C-22) | Surplus | - | 12.5-14.5 | 0.5 | 0.015 | 0.08 | 0.020 | 20.0-22.5 | - | - | 0.35 | - |
UNS N10276 (Hastelloy C-276) | Surplus | - | 15.0-17.0 | 1.0 | 0.01 | 0.08 | 0.030 | 14.5-16.5 | - | - | - | - |
UNS N10665 (Hastelloy B-2) | Surplus | - | 26.0-30.0 | 1.0 | 0.02 | 0.10 | 0.030 | 1.00 | - | - | - | - |
UNS N10673 (Hastelloy B-3) | 65.0 | - | 27.0-32.0 | 3.0 | 0.01 | 0.10 | 0.010 | 1.0-3.0 | - | - | 0.20 | 0.02 |
Mechanical Properties
Grade | Tensile Strength | Yield Strength | Ductility | HRB |
UNS N02200 | ||||
Anneales | 379 | 103 | 40 | - |
Stress-relieved | 448 | 276 | 15 | B65 |
N04400(Monel400) | ||||
Anneales | 483 | 193 | 35 | - |
Stress-relieved | 586 | 378 | 15 | B65 |
UNS N06600(Inconel600) | 552 | 241 | 30 | - |
UNS N06601(Inconel601) | 552 | 207 | 30 | - |
UNS N06625(Inconel625) | ||||
Gr.1 | 827 | 414 | 30 | - |
Gr.2 | 690 | 276 | 30 | - |
UNS N06690(Inconel690) | 586 | 241 | 30 | - |
UNS N08020(Alloy 20) | 551 | 241 | 30 | - |
UNS N08028(Alloy 28) | 500 | 214 | 40 | - |
UNS N08800(Incoloy800) | ||||
Annealed | 518 | 207 | 30 | - |
Cold-Worked | 572 | 324 | 30 | - |
UNS N08810(Incoloy800H) | 448 | 172 | 30 | - |
UNS N08811(Incoloy800HT) | 448 | 172 | 30 | - |
UNS N08825(Incoloy825) | 241 | 586 | 30 | - |
UNS N06022(Hastelloy C-22) | 690 | 310 | 45 | - |
UNS N10276(Hastelloy C-276) | 690 | 283 | 40 | - |
UNS N10665(Hastelloy B-2) | 760 | 350 | 40 | - |
UNS N10673(Hastelloy B-3) | 760 | 350 | 40 | - |
Detail Photos
Certification
Packing & Shipping
FAQ
Q1: ARE YOU FACTORY OR TRADER?
A1: Our company is a cold rolling manufacturer of
magnetic stainless steel coil since 2009. We've gained our Export
Right and become an integrated company of industry and trade in
order to satisfy buyer's multi-request on different material and
products.
Q2: WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?
A2: Stainless Steel Coils / Strips, Stainless Steel Sheets /
Plates, Stainless Steel Circles / Discs, Decorative Stainless Steel
Sheets.
Q3: HOW TO GET A SAMPLE?
A3: FREE samples are available for your checking and testing.
And to get free samples, you need to send us you detailed receiving
address (including post code) and your DHL/FedEx/UPS account for
collecting samples, courier cost will be paid in your side.
Q4: HOW TO VISIT YOUR FACTORY?
A4: Most of the main cities have flights to Wuxi; you can
take flight to Wuxi Shuofang International Airport.
If you come from Shanghai, it will take 2 hours by flight (every
day 5 flights).
If you come from Hongkong, it will take 1 hour by flight (every day
1 flight around noon time).