|
[China]
Trade Verify
Address: No.283-1, Youyi Middle Road, Xishan District, Wuxi City, Jiangsu Province
Contact name:Gao
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
|
Verified Suppliers
|
|
|
| Products | Stainless Steel Bar |
| Grade | 17-4PH / 630 / UNS S17400 / 1.4542 |
| Diameter | 4 - 350mm |
| Length | 6m or custom cutting any length as request |
| Finishing | Bright Bar / Black Surface |
| Heat Treatment | Solid Solution , ageing |
| Surface Process | Polishing , Peeling |
| Other Grade | 201 303 304 304L 309S 310S 316L 316Ti 317L 321 347 410 420 430 431 2205 2507 904L 254SMO 416 440A/B/C.etc |
| MOQ | 500 Kgs |
| Loading Port | Shanghai Port |
| Processing | Cutting |
| Packing | Wooden box or cutting as request |
Alloy 1.4542 is a structurally hardened martensitic stainless steel
which combines a hardness of about 48 HRC with good corrosion
resistance.
This grade has a hardening peak at 480°C which allows easy ageing
after machining on an initially solution treated condition. The
grade is remelted to improve the cleanliness and homogeneity of the
material.
Stainless has a number of sources in stock, as well as different formats or states of the product to suit your processing needs.
This product can also be custom made or cut into slugs by our service centres.
Due to its good resistance to corrosion, its good hardness in the treated state (48HRC) and its resilience, the grade is used in particular in the manufacture of instruments for the medical sector (drills, etc.), in general mechanics, in the food industry and in the automotive sector.
The manufacturing processes associated with the transformation processes make it possible to obtain a homogeneous microstructure. In the treated state, the microstructure consists of martensite and nanometric intermetallic precipitates (Ni3Cu) which germinate during ageing.
Forgeability
The grade can be hot forged in the 900/1250°C temperature range.
Resolving will be necessary to achieve maximum hardness.
Weldability
The grade can be welded using most processes. Welding should
preferably be done before ageing to avoid embrittlement of the heat
affected zone.
Typical heat treatments
The grade has very good corrosion resistance but must be passivated. The microstructure contains little or no chromium carbides, which makes it less susceptible to intergranular corrosion.
Round or flat bars annealed (Condition A or AT) or pre-treated.
Surface ground or peeled depending on diameter
Flat bars made to measure in the annealed condition (consult us)
Other format : sheets
