|
[China]
Trade Verify
Address: No.283-1, Youyi Middle Road, Xishan District, Wuxi City, Jiangsu Province
Contact name:Gao
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
|
Verified Suppliers
|
|
|
Hot Rolled High Hardness Stainless Steel Plate Grade 420 440C 17-4PH 17-7PH SS Plate
| Description | ASTM A240 / ASME SA240 Stainless Steel Plates, ASTM A240 Hot Rolled Stainless Steel Plates |
| Standard | ASTM, ASME, BS, DIN, EN |
| Material | 310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 304, 304L, |
| 302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S, 420, 430, 631, 904L, Duplex, etc | |
| Specification | Cold rolled: 1219mm * 2438mm (4′ x 8′), 1219mm * 3048mm (4′ x 10′),
1220mm * 2440mm, 1250mm * 2500mm or as your requirement.
Hot rolled: 1500mm * 2000mm, 1000mm * 3000mm, 1500mm * 4000mm, 1500m * 6000mm or as your requiremnt. |
| Technique | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Etc. |
| Surface | 2B, 2D, BA, NO. 1, NO. 4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching |
| Service | Laser Cutting, Water Cutting, Fire Cutting, Bending |
| Thickness | 0.25-200mm, 0.3mm to 120mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, 12000mm |
| Package | Standard Export Seaworthy Package, or as required. |
| Value Added Services | Cladding,Heat Treatment,Annealed, Pickling, Polish,Rolling,Cutting,Bending,Forging,Minor Fabrication Etc. |
| MTC | Mill Test Certificate, Available as per EN 10204 3.1 |
Stainless steel coil plate – ASTM A240M
The most efficient route for a stainless steel production mill to
produce plate (5mm and over) is in coil form. The coil is then
further downstream processed by the mill or through a service
centre with equipment to flatten (often called ‘levelling’) and cut
to length.
The maximum plate width produced by mills from coil is 2000mm and the maximum thickness is 13mm for hot rolled and 8mm for cold rolled.
| Grade | Thickness (mm) | Coil width (mm) | Finish |
| 304/304L | 5.0 | 1500 | 2B |
| 316/316L | 6.0 | 2000 | No. 1 |
| 304/304L | 8.0 | 1500 | No. 1 |
| 316/316L | 10.0 | 2000 | |
| 12.0 | |||
| 3CR12 | 5.0 | 1250 | No. 1 |
Stainless steel quarto plate products – ASTM Aa240M
Another method of producing stainless steel plate within and beyond
the thickness range of coil production is from a slab of steel that
is rolled in the flat condition to a specified length, width and
thickness. The product of this process is commonly referred to as
quarto plate and is available from mills in thickness from 5mm and
above and widths to 4000mm in some thicknesses.
The standard grades and thickness for quarto plate are as follows:
| Grades | 304/304L, 316/316L, 3CR12. |
| Thickness (mm) | 5.0, 6.0, 8.0, 10.0, 12.0, 16.0 & 20.0. |
| Width (mm) | 1500 & 2000. |
| Length (mm) | 6000. |
| Finish | No. 1 (HRAP). |
Quarto plate is commonly stocked as a dual certified grade, i.e. 304/304L and 316/316L.
Stainless steel chequer (floor) plate
| Grades | 304. |
| Thickness (mm) | 3.18 & 4.76 . |
| Width (mm) | 1219 & 1250. |
| Length (mm) | 2438. |
