JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
Verified Suppliers
|
|
EN 10088-2 1.4462 Duplex Stainless Steel Plate Alloy 2205 Stainless Steel 0.4 - 16.0mm Stock in Coil
Specification of our 2205 duplex stainless steel plate
Product Name | duplex 2205 Stainless Steel Plate/Sheet |
Technical Standard | JIS,AISI, ASTM,GB,DIN,EN |
Steel Grade | 2205 / S32205 / S31803 / 1.4462 |
Type | Stainless steel sheet/ plate/coil |
Thickness | Cold rolled:0.4~3.0mm |
Hot rolled:3mm~100mm | |
Width | 1000mm 1219mm 1500mm 2000mm or custom cutting as request |
Length | custom as clients request |
Surface | NO.1 2B or process other finishing |
QualityCertificate | Mill Test Certificate |
Package | Water proof paper is inner packing,galvanized steel or coated steel sheet is outer packing , side guard plate,then wrapped by seven steel belt.or according to customer's requirement |
Trade term | FOB CIF CFR |
Loading port | Shanghai Port, China |
Other Products | Pipe / Bar / Strip / angle / channel |
Duplex 2205 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. Often referred to as the work horse grade, 2205 is the most widely used grade in the duplex family of stainless steels.
The advantage of a duplex structure is that it combines the favorable qualities of a ferritic alloy (stress corrosion cracking resistance and high strength) with those of an austenitic alloy (ease of fabrication and corrosion resistance).
Usage of 2205 Duplex stainless steel should be limited to temperatures below 600° F. Extended elevated temperature exposure can embrittle 2205 stainless.
2205 duplex stainless steel is a cost effective solution for many applications where the 300 series stainless steels are susceptible to chloride stress corrosion cracking. Stress corrosion cracking occurs when stainless steels are subjected to tensile stress, while in contact with solutions containing chlorides. Increasing temperatures also increase the susceptibility of stainless steels to stress corrosion cracking.
The combination of chromium, molybdenum and nitrogen convey the good resistance of 2205 to chloride pitting and crevice corrosion. This resistance is extremely important for services such as marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications. The high chromium, molybdenum and nitrogen contents of 2205 provide corrosion resistance superior to common stainless steels, such as, 316L and 317L in most environments.
Cr | Ni | Mo | C | N | Mn | Si | P | S | Fe |
---|---|---|---|---|---|---|---|---|---|
22.0-23.0 | 4.50-6.50 | 3.00-3.50 | .030 Max | 0.14-0.20 | 2.00 Max | 1.00 Max | .030 Max | .020 Max | Balance |
Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Flanges, Fittings & Valves |
---|---|---|---|---|---|---|
A790 | A790 | A789 | A789 | A240 | A276 | A182 |
Specified Tensile Properties ASTM A240
Ultimate Tensile Strength, ksi Minimum | .2% Yield Strength, ksi Minimum | Hardness Max. |
---|---|---|
95 | 65 | 31 Rockwell C |
Products Show