|
[China]
Trade Verify
Address: No.283-1, Youyi Middle Road, Xishan District, Wuxi City, Jiangsu Province
Contact name:Gao
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
|
Verified Suppliers
|
|
|
ASTM A210-C Seamless Steel Pipe Steel Pipe St52.4 EN 1.0832 Steel Pipe Seamless Pipe Tube
Description Name: ASME SA210 / ASTM A210 Grade C boiler pipes; A210 Grade C pipes; A210 carbon steel tube; ASTM A210 seamless tubing; ASTM A210 carbon steel pipe; SA210 SEAMLESS PIPE; ASTM A210 cold drawn seamless steel tubes; ASTM A210 pipes and tubing; carbon steel tube; Seamless steel tube; steel tube.
Size: 1⁄2 in. to 16 in. [12.7 to 406.4mm]
W.T.: 1.5mm-50mm
Shape: Round
Production Type: Hot finished and cold finished.
Length: Single random length/ Double random length or as customer’s actual request max length is 25m
Grade: Grade C
Heat Treatment: Hot-finished tubes need not be heat treated. Cold- finished tubes shall be given a subcritical anneal, a full anneal, or a normalizing heat treatment after the final cold finishing process.
| Chemical Components (%) | ||||||||
| Grade | C | Si | Mn | P | S | Mo | Cr | V |
| C | ≤0.35 | ≥0.10 | 0.29-1.06 | ≤0.035 | ≤0.035 | / | / | / |
| Mechanical Properties | ||||
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation (%) | Hardness (HRB) |
| C | ≥485 | ≥275 | ≥30 | ≤89 |
| Seamless, Cold-Finished Tubes | ||
Outside Diameter In. (mm) | Wall thickness Tolerance % | |
| Over (+) | Under (-) | |
| 1 ½ (38.1) and under | 20 | 0 |
| Over 1½ (38.1) | 22 | 0 |
| Cold-Finished Seamless Tubes | ||
Outside Diameter In. (mm) | Permissible Variations In. (mm) | |
| Over (+) | Under (-) | |
| Under 1 (25.4) | 0.004 (0.10) | 0.004 (0.10) |
| 1 to 1 ½ (25.4 to 38.1), Incl | 0.006 (0.15) | 0.006 (0.15) |
| Over 11⁄2 to 2 (38.1 to 50.8), Excl | 0.008 (0.20) | 0.008 (0.20) |
| 2 to 21⁄2 (50.8 to 63.5), Excl | 0.010 (0.25) | 0.010 (0.25) |
| 21⁄2 to 3 (63.5 to 76.2), Excl | 0.012 (0.30) | 0.012 (0.30) |
| Cold-Finished Seamless Tubes | ||
| Outside Diameter, In.(mm) | Cut Length, in.(mm) | |
| Over (+) | Under (-) | |
| All Sizes | 3⁄16 [5] | 0 [0] |
| Under 2 (50.8) | 1⁄8 [3] | 0 [0] |
| 2 (50.8) and over | 3⁄16 [5] | 0 [0] |
| Under 2 (50.8) | 1⁄8 [3] | 0 [0] |
| 2 (50.8) and over | 3⁄16 [5] | 0 [0] |
| These permissible variations in length apply to tubes before bending. They apply to cut lengths up to and including 24 ft [7.3 m]. For lengths greater than 24 ft [7.3 m], the above over-tolerances shall be increased by 1⁄8 in. [3 mm] for each 10 ft [3 m] or fraction thereof over 24 ft or 1⁄2 in. [13 mm], whichever is the lesser. | ||
Each tube shall be subjected to the hydrostatic pressure test, or instead of this test, a nondestructive test may be used when specified by the purchaser.
| Hydrostatic Test Pressures | |
| Outside Diameter of Tube, in. [mm] | Hydrostatic Test Pressure, psi [MPa] |
| Under 1 [25.4] | 1000 [7] |
| 1 to 11⁄2 [25.4 to 38.1], excl | 1500 [10] |
| 11⁄2 to 2 [38.1 to 50.8], excl | 2000 [14] |
| 2 to 3 [50.8 to 76.2], excl | 2500 [17] |
One flattening test shall be made on specimens from each end of one finished tube from each lot, but not the one used for the flaring test. Tears or breaks occurring at the 12 or 6 o’clock positions on Grade C tubing with sizes of 2.375 in. [60.3 mm] in outside diameter and smaller shall not be considered a basis for rejection.
One flaring test shall be made on specie- men from each end of the one finished tube from each lot, but not the one used for the flattening test.
Orders for ASTM A210 / A210M, ASME SA210 should include the following, as required, to describe the desired material adequately:
Apply to Boiler Tubes, Seamless Steel Tubes, Steel Tubes, and Superheater Tubes.
Packed in wooden box or bundles protected with plastic paper, and suitably protected for sea-worthily delivery or as requested.
The Product marking shall include the ASTM A210 or ASME SA210, size, heat no., Lot No. and Manufacture name or logo.
