|
[China]
Trade Verify
Address: No999 .wenzhou airport wenzhou city,zhejiang china
Contact name:BAIN SHEN
Wenzhou Zheheng Steel Industry Co.,Ltd |
|
Verified Suppliers
|
|
|
B168 / B516, B517 Alloy 600 / N06600 / 2.4816 / NiCr15Fe inconel tube,inconel alloy tube
We zheheng steel produce din B168 alloy pipe / B516 inconel
tube, B517 alloy 600 tube, Alloy 600 tube/ N06600 inconel
alloy tube / 2.4816 inconel alloy tube / NiCr15Fe
inconel tube,inconel alloy tube ,we are also producer according to
standard din en 10095,din 17742, din 17750 / din
1775 ,UNS N06600
DIN W. Nr. 2.4816
zheheng steel as one of Alloy 600 steel tube
manufacturer / N06600 alloy tube exporter / 2.4816 / NiCr15Fe
alloy steel tube supplier in china always provide high quality
products
We warmly welcome friends at home and abroad to contact us for
cooperation based on mutual benefits for a bright and successful
future.
Products description:
Equivalent designations
UNS N06600
DIN W. Nr. 2.4816
| Form | ASTM |
| Rod, bar and wire | B 166 |
| Plate, sheet and strip | B 168, B 906 |
| Seamless pipe and tube | B 167, B 829 |
| Welded pipe | B 517, B 775 |
| Welded tube | B 516, B 751 |
| Welding fitting | B 366 |
| Billet and bar for reforging | B 472 |
| Forging | B 564 |
Inconel 600 Chemical composition:
| % | Ni | Cr | Fe | C | Mn | Si | S | Cu |
| min | 72 | 14 | 6 | |||||
| max | 17 | 10 | 0.15 | 1 | 0.5 | 0.015 | 0.5 |
Inconel 600 Physical properties:
| Density | 8.47 g/cm3 |
| Melting range | 1354-141 |
Features: Inconel 600 has good resistance to corrosion and high temperature, and has high strength and good fabricability. It resists chloride-ion-incurred stress corrosion cracking, sulfur compounds and oxidizing conditions at high temperatures.
Applications: Chemical process industry, heat treating fixtures, airframe components and nuclear reactors.
Note: Inconel is a registered trademark of the Special Metals Corporation group of companies.
Heat Treatment Assurance
A full-automatic natural gas furnace with 24 meters in length.The real temperature tolerance could be within 10℃.
Mechanical and Other Requirements
1 Mechanical Properties—The material shall conform to the
requirements for mechanical properties prescribed in Table
2 Deep-Drawing and Spinning Quality Sheet and Strip—The material
shall conform to the requirements for grain size and hardness
properties prescribed in Table 4.
6.2.1 The mechanical properties of Table 3 do not apply to
deep-drawing and spinning quality sheet and strip.
Product show:
