Active Member
|
[China]
Address: Room 1514, Floor 4, No. 111, Fengpu Avenue, Fengpu Industrial Zone, Fengxian District, Shanghai, China
Contact name:camille
Shanghai Nadong Metal Products Co.,Ltd. |
|
|
Hot dipped zinc coated corrugated galvanized steel roofing metal plate
Metallic surfaces are not immune to damage and wear, especially during the fabrication and finishing processes. Metal surfaces can be marred by chatter marks, scratches or swirls, or contaminated by overspray, solvents, dust and the like. Potential hazards to your metal surfaces arise during:
We will customize different viscosities for you according to your different surfaces. Produce the protective film suitable for your products for you. While protecting your product, it will not negatively affect its surface. Greatly improve your work efficiency. |
| Product Name | Roofing Steel Sheet Material Plate Q235B Corrugated Steel Roofing Sheet |
| Thickness | 0.13-1.5mm |
| Material | GI/PPGI steel coil prepainted galvanized steel coil |
| Surface treatment | Zinc coated, color coated |
| Zinc coating | 40-275gram/m2 |
| Width | Generally 750mm/ 820mm/ 840mm/ 850mm/ 900mm/ 910mm/ 1050mm/ 1250mm |
| Length | Any length, according to the transportation, usually less than 12m |
| Color | Standard color: blue, white, red Special color: according to RAL colors |
| Characteristics | 1.weather proof 2. .Anti rust 3. Fire proof 4. Heating insulation 5.Long life span: more than 20 years |
| Packing | Plastic film + wooden pallet or as your request |
| Application | Building material Container material |
Chemical Composition
| Specification | Grade | Chemical Composition(wt%) | ||||||
| C | Mn | Ni | Cr | Mo | Ti | |||
| ASTMJIS | 316L/022Cr17Ni12Mo2 | ≤0.03 | ≤2.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | - | |
| JIS | SUS316L | ≤0.03 | ≤2.0 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 | - | |
| ASTMJIS | 316Ti/SUS 316Ti | ≤0.08 | ≤2.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | 5*(C+N)-0.7 | |
Properties
| Spec | Grade | Mechanical Property | Physical Property | ||||
Y.S (N/MM2) | T.S (N/MM2) | EL (%) | HRB | Specific Heat (J/g℃) | Modulus of Elasticity (KN/mm2) | ||
| ASTM/GB | 316L/022Cr17Ni12Mo2 | ≥170 | ≥485 | ≥40 | ≤95 | 0.5 | 193 |
| JIS | SUS316L | ≥175 | ≥480 | ≥40 | ≤90 | 193 | |
| ASTM | 316Ti | ≥205 | ≥515 | ≥40 | ≤95 | 0.5 | 200 |
