Active Member
|
[China]
Address: 2F Building A,Ganghuaxing Industrial Area,2# Chongqing Road,Fuyong Town,Baoan District,Shenzhen,Guangdong,China
Contact name:joyce
Shenzhen Haojingyuan Optoelectronic Co.,Ltd |
|
|
High effieciency Advertising HD LED Advertising Display P10 outdoor led
screen
Advantages of Led display .
(1) High brightness DIP LED is used for outdoor led display, keeps the display content visible even if facing the strong sunshine directly.
(2) With Anti-UV ray mask, the color of the mask would never change even if under exposure of UV ray.
(3) Weatherproof design, completely outdoor use.
(4) Easy for assembling and connection with the connector added.
(5) High color uniformity and clear image can bring you a vivid audio visual effect.
(6) Both front and rear access are available.
(7) The LED Chips that we use have the advantages of large viewing angle, low power consumption and good color uniformity.
(8) Use the same level of red, green and blue led chips, which makes the image display of whole led display more excellent and uniform.
(9) The maintenance of pixel and single led has been realized.
(10) Good quality raw material, accurate technique and careful inspection insures the high quality of led display
| 1. | Part No. | p10 outdoor led module |
| 2. | LED chip | Sanan/ Epistar/Nationstar |
| 3. | Physical Pixel Pitch | 10mm |
| 4. | Physical Pixel Density | 10000dots/m2 |
| 5. | Pixel composition | 1Red, 1Green,1Blue |
| 6. | Moduel Size | 320*160mm |
| 7. | Moduel resolution | 32*16dots |
| 8. | Cabinet thickness | < 160 mm |
| 10. | Brightness | ≥ 6000 nits |
| 11. | Colors | 16.7million |
| 12. | Viewing angle | Horizontal ≥120°, Vertical : ≥ 45° |
| 13. | Viewing distance | 10m -300m |
| 14. | Scan frequency | ≥600 Hz There will be one receive card in each cabinet ,so that the LED display won't sparked .Also it is very easy to move and connetct |
| 15. | Control method | Controlled by PC, synchronous display |
| 16. | Life span( half brightness) | ≥100,000 hours |
| 17. | IP rate | IP65 ( front side and rear side) |
| 18. | Average power consumption | 400W/sqm |
| 19. | Input voltage | AC220V/50Hz ±10% or AC110V/60Hz ±10% or AC380V/60Hz ±10% |
| 20. | Operating Environment | Temperature:-20+60 Humidity:10%95%RH |
| 21. | Operating system | Windows 98/2000/ME/XP |
| 22. | Type of video signal | S-video, composite video ,RGB ,VGA ,DVI |
FAQ
1. What is LED?
LED stands for Light Emitting Diode, a kind of semiconductor which is used to give and receive the electronic signal into infrared rays or light, using the characteristics of compound semiconductor.
2. What are Pixel Pitch and Pixel Configuration?
Pixel Pitch is the distance between neighboring pixels.
Pixel Configuration is the description of the consistence of a pixel.
3. What are LED Type, Module Size and Module Resolution?
LED Type is the description of LED lamp.
Module Size is the measurement of a module.
Module Resolution is the number of pixels per module.
4. What is Drive Method, Driving IC?
Drive Method uses static, 1/4 scan, 1/8 scan, 1/16 scan, the latter one contributes to less brightness than the former.
Driving IC is the generic term for several kinds of IC, which are used to control the LED lamps.
5. What is Viewing Angle?
Viewing angle is the maximum angle at which a display can be viewed with acceptable visual performance.
6. Are you factory?
Yes. We are factory.
