|
[China]
Trade Verify
Address: 20 meters south of China Postal Savings Bank Liuting Business Office,Liuting Street,Chengyang District,Qingdao Shandong
Contact name:Tina
Qingdao Teste Metal Products Co., Ltd. |
|
Verified Suppliers
|
|
|
MONEL 400Monel 400® or Alloy 400 (UNS N04400) is a nickel-copper alloy with excellent corrosion resistance, medium/high strength, and excellent weldability. Is Alloy 400 the same as Monel 400? Yes, the alloy 400 is the same as the Monel 400. Special Metals holds the Monel trade name, so unless you are special Metals, if you produce this grade, it is Alloy 400. The Monel 400 is resistant to various corrosion conditions. For example, acidic applications involving hydrofluoric acid, brine, sulfuric acid and alkali. Alloy 400 can only be hardened by cold working. The Monel 400 is used in many industries, especially Marine and chemical processing, due to its excellent corrosion resistance.
Monel 400 has excellent mechanical properties at sub-zero temperatures. Alloy 400 increases in strength and hardness but slightly decreases in impact resistance or ductility. 400 can maintain toughness over a wide range of temperatures.
Monel 400 is more resistant to oxidative attack under most conditions than other higher copper alloys. These properties of Alloy 400 make it suitable for a variety of environments, especially Marine environments
Monel 400 is available round bar, tubing, flat bar, hex bar, pipe, plate, sheet, coil and square bar. One of the more common specifications of Monel 400 is QQ-N-281. If you require Monel 400 please call Michlin today with any Alloy 400 requirements. Also, if you are looking for where to buy Alloy 400 plate, call CJ Metal today!
MONEL 400 CHEMICAL COMPOSITION
| Type | C | Cu | Fe | Mn | N | S | Si |
| Monel 400 | 0.3%Max | 28.0%~34.0% | 2.5%Max | 2.0%Max | 63.0%Min | 0.024%Max | 0.5%Max |
ALLOY 400 MECHANICAL CHARACTERISTICS
Type | Density | Melting Point | Tensile Strength | Yield Strength(0.2% Offset) | Elongation |
| Monel 400 | 8.8g/cm3 | 1350℃(2460℉) | Psi-80000,Mpa-550 | Psi-35000,Mpa-240 | 40% |
MONEL 400 APPLICATION
Electrical and Electrical Components Feed Water and Steam Generator Tubing Heat Exchangers Marine Fixtures Propeller and Pump Shafts Pumps and Valves Sulfuric Acid and Hydrofluoric Tanks Transfer Piping from Oil Refinery Crude Columns Valves.
MONEL 400 FEATURES
Corrosion Resistant in a Variety of Marine and Chemical Environments Excellent Resistance to Chloride Ion Stress Corrosion Cracking Good Mechanical Properties from Sub-Zero Temps to 480° C.
MONEL 400 SHAPE AVAILABLE
Round Bar – Hex Bar – Flat Bar – Square Bar – Tubing – Pipe – Coil – Wire – Sheet – Plate
NICKEL ALLOY
| Nickel Alloys |
|
