|
[China]
Trade Verify
Address: Yuhua Stainless Steel Factory, Hexie Road, Muyuan Industrial Zone, Shishan Town, Nanhai District, Foshan City
Contact name:Lee
Foshan Nanhai Yuhua Hardware Products Co., Ltd. |
|
Verified Suppliers
|
|
|
JIS SS Round Tube Perforated Tubing Stainless Steel ASTM 50MM SS310
316L 3m
About scratches of Stainless Steel
For fine scratches, cleaners such as Comet and Revere Stainless
Steel and Copper Cleaner are non-abrasive cleansers that will
gently buff stainless steel. They come in a dry powder that needs
to be combined with water or as cream-based cleaners that go on the
metal a bit smoother. Appliance manufacturers often make their own
cleaners that are easy to find at home improvement stores.
Sanding with wet sandpaper is recommended for deeper scratches.
Sandpaper comes in various grits, so check first with your
appliance manufacturer about which kind of sandpaper will work best
for your stainless steel.
If you have a lot of scratches, there are a few DIY scratch removal
kits, such as Scratch-B-Gone or the Siege 63001 Stainless Steel
Sink and Cookware Scratch Remover pack, that will take you step by
step through the scratch removal process. These kits feature
products similar to the two described above in one kit and will
cost you a little more out of pocket.
One piece of advice is universal -- always rub or buff the scratch
with the grain of the metal. If you go against the grain of the
steel, you'll only make the scratch worse!
SS Round Tube Specification
| Name | JIS SS Round Tube Perforated Tubing Stainless Steel ASTM 50MM SS310 316L 3m |
| Items | 304/316L Stainless Steel pipe |
| Standard | ASTM A554 |
| Material Grade | 304: Ni 8%, Cr 18% |
| 316L:Ni10%,Cr16% | |
| Outer Diameter | 50mm |
| Thickness | 3mm |
| Length | 1500mm, or as customers' request |
| Tolerance | a) Outer Diameter: +/- 0.2mm |
| b) Thickness: +/- 0.03mm | |
| c) Length: +/- 5mm | |
| Surface | annealing,pickling |
| sandblasting | |
| Application | industry,exhausting,welding,furniture,window |
| Test | Squash test, extended test, water pressure test,heat treatment, NDT |
Stainless Steel Pipe Chemical Component( %)
| Grade ASTM | C | Si | Mn | S | P | Cr | Ni |
| 316 | ≤0.035 | ≤1.00 | 2 | ≤0.03 | ≤0.045 | 16-18 | 10-14 |
| 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.035 | 17.00-19.00 | 8.00-11.00 |
