|
[China]
Trade Verify
Address: Yuhua Stainless Steel Factory, Hexie Road, Muyuan Industrial Zone, Shishan Town, Nanhai District, Foshan City
Contact name:Lee
Foshan Nanhai Yuhua Hardware Products Co., Ltd. |
|
Verified Suppliers
|
|
|
30mm Heavy Duty AISI BS ASTM A554 Stainless Steel Clothes Rail
How to Make Stainless Steel Shine
Adding a nice sheen to your appliance elevates your kitchen decor. Learn how to polish stainless steel and make it shiny. Buffing a clean appliance with oil is the secret.
Commonly used oils are baby oil, olive oil, mineral oil and even coconut oil. Dry buff using a fresh microfiber cloth, going with the grain, to get a good shine. Any excess oil may go rancid, so use a small amount.
Here's how to polish stainless steel to get that out-of-the-box shine:
Thoroughly clean your stainless steel appliance using one of the above methods.Put a few drops of oil on a soft paper towel.Spread a thin layer of oil onto the appliance.Buff the oil, using small circles or short strokes with the grain.After the oil is absorbed, get a dry cloth.Dry buff using the same method, this time with the new cloth.When your stainless steel appliance is shiny, you’re done.Shine Stainless Steel with Lemon Oil
Steel Hanging Rail Specification
| Product Name | 30mm Heavy Duty AISI BS ASTM A554 Stainless Steel Clothes Rail |
| Standard | AISI,ASTM, EN, BS, GB, DIN, JIS |
| Diameter | 30mm |
| Thickness | 0.5mm |
Length | 2M |
| Dia Tolerance | H9 / H11 / H13 ,or requirement |
| Materials | 201/304 |
| Surface | Bright, pickling ,polishing,annealing,etc |
| Inspection | ISO,BV,SGS,MTC |
| Packing | Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit forall kinds of transport,or
as required |
| Supply Ability | 1000 metric tons/month |
| MOQ | 5 metric ton,sample order accepted |
| Shipment time | Within 7-10 workdays after receiving deposit or L/C |
| Payments | T/T,LC |
Elemental comparison of the different materials
| Chemical Composition of Material | Material | 201 | 316L | 304 |
| C | ≤0.15 | ≤0.035 | ≤0.08 | |
| Si | ≤1.00 | ≤1.00 | ≤1.00 | |
| Mn | 5.5-7.5 | 2 | ≤2.00 | |
| P | ≤0.06 | ≤0.045 | ≤0.045 | |
| S | ≤0.03 | ≤0.03 | ≤0.03 | |
| Cr | 16-18 | 16-18 | 18-20 | |
| Ni | 3.5-5.5 | 10-14 | 8-11 | |
| Mechanical Property | Material Item | 201 | 202 | |
| Tensile Strength | ≥535 | ≥520 | ||
| Yield Strength | ≥245 | ≥205 | ||
| Extension | ≥30% | ≥30% | ||
| Hardness (HV) | <253 | <253 |
