|
[China]
Trade Verify
Address: Chengdong Development Zone, Anping City, He Bei Province, China
Contact name:DONG WENREN
Anping Qianpu Wire Mesh Products Co., Ltd. |
|
Verified Suppliers
|
|
|
Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.
80 wires per inch. Material can easily bend by hand and cut with scissors and laser. Commonly used for laboratories, screen printing, and filters. This market grade mesh is woven from a standard wire diameter which is heavier than the wire used to weave bolting cloth.
| Mesh | Weave Pattern | Wire Diameter | Aperture | Open Area Rate | ||
| mm | Inch | mm | Inch | % | ||
| 80 | Twilled Weave | 0.18 | 0.0070 | 0.137 | 0.0054 | 18.75 |
| 0.15 | 0.0059 | 0.167 | 0.0065 | 27.83 | ||
| 0.13 | 0.0051 | 0.187 | 0.0073 | 34.87 | ||
| 0.12 | 0.0047 | 0.197 | 0.0077 | 38.69 | ||
| 0.10 | 0.0039 | 0.217 | 0.0085 | 46.92 | ||
1) Roll Size Roll Width: 36”, 48”, 1.0m Roll Length: 100ft, 30m 2) Cut in Pieces Rectangle shape, square shape, round shape and other required shapes and sizes. | ||||||
| AISI | Chemical Composition of Several Stainless Steel Wires (%) | |||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | |
| 304 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 18.00~20.00 | - |
| 304L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 18.00~20.00 | - |
| 316 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 |
| 316L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 12.00~15.00 | 16.00~18.00 | 2.00~3.00 |
304 stainless steel: Most common stainless alloy used in wire weaving. Excellent corrosion properties and can withstand temperatures of 1100 Degrees F.
304L stainless steel: Similar properties as 304ss but lower carbon content to permit better welding.
316 stainless steel: Similar properties to 304ss but is stabilized by the addition of Molybdenum for increased resistance to chemical corrosion.
316L stainless steel: Similar properties as 316ss but lower carbon content to permit better welding.
Superior corrosion and abrasion resistance;
Can resist to rust and bad weather;
High filter precision;
Durable and high strength;
Beautiful appearance, etc.
Particle Filter
Shielding Mesh
Battery Mesh
Grinding Material Mesh
Quartz Sand Paper Material Selection
Sifting Powders
Laboratories and Filters
Strainers
Sifting and Mixing Chemicals
Sieves
EMI and RFI shielding
| MESH Count | Diameter of Wire | Width of Opening | Open Area | Weight | ||
| % per | Pounds | |||||
| per Inch | Inches | mm | Inches | mm | 100 Sq. Ft. | per 100Sq.Ft |
| 12 x 12 | 0.032 | 0.81 | 0.051 | 1.3 | 37.9 | 78.8 |
| 14 x 14 | 0.028 | 0.71 | 0.043 | 1.1 | 37 | 70.4 |
| 16 x 16 | 0.023 | 0.58 | 0.04 | 1 | 39.9 | 54.3 |
| 20 x 20 | 0.021 | 0.53 | 0.029 | 0.74 | 33.6 | 56.6 |
| 30 x 30 | 0.015 | 0.38 | 0.018 | 0.47 | 30.3 | 43.3 |
| 35 x 35 | 0.014 | 0.36 | 0.015 | 0.37 | 26 | 44 |
| 40 x 40 | 0.012 | 0.31 | 0.013 | 0.33 | 27 | 36.9 |
| 50 x 50 | 0.011 | 0.28 | 0.009 | 0.229 | 20.3 | 38.8 |
| 50 x 50 | 0.0055 | 0.14 | 0.015 | 0.37 | 52.6 | 9.7 |
| 60 x 60 | 0.011 | 0.28 | 0.0057 | 0.144 | 11.6 | 46.6 |
| 60 x 60 | 0.0045 | 0.114 | 0.012 | 0.31 | 53.3 | 7.8 |
| 80 x 80 | 0.007 | 0.178 | 0.0055 | 0.14 | 19.4 | 25.1 |
| 100 x 100 | 0.005 | 0.127 | 0.005 | 0.127 | 25 | 16 |
| 120 x 120 | 0.0042 | 0.107 | 0.0041 | 0.105 | 24.6 | 13.6 |
| 120 x 120 | 0.004 | 0.102 | 0.0043 | 0.11 | 27 | 12.3 |
| 150 x 150 | 0.003 | 0.076 | 0.0037 | 0.093 | 30.3 | 8.7 |
| 180 x 180 | 0.0025 | 0.064 | 0.0031 | 0.078 | 30.3 | 7.2 |
| 200 x 200 | 0.0025 | 0.064 | 0.0025 | 0.064 | 25 | 8 |
| 200 x 200 | 0.0023 | 0.058 | 0.0027 | 0.069 | 29.2 | 6.8 |
| 270 x 270 | 0.0016 | 0.041 | 0.0021 | 0.053 | 32.3 | 4.4 |
| 300 x 300 | 0.0015 | 0.038 | 0.0018 | 0.047 | 30.3 | 4.3 |
| 325 x 325 | 0.0014 | 0.036 | 0.0017 | 0.043 | 29.7 | 4.1 |
| 400 x 400 | 0.001 | 0.025 | 0.0015 | 0.038 | 36 | 2.6 |
Packing: Other specifications according to your requirements.
In order to make an offer,please provide below specification of wire mesh
Material
Mesh size or aperture size
Wire diameter
Length per roll
Width per roll
About us
We are is a professional wire mesh company.
We are located in Anping County, Hebei Province,China.
Our product range
We have our own woven machines,our technique is based on rich experience of woven,from production to selling we have our professional personnel to compeleted,our woven mesh now cover plain weave,twill weave,dutch weave,plain dutch weave,twill dutch weave,we keep the flat surface of woven procudure and accurate filtration technique.All mesh is manufactured from highly pick up of stainless steel wire.
We welcome your enquiry!
