|
[China]
Trade Verify
Address: Chengdong Development Zone, Anping City, He Bei Province, China
Contact name:DONG WENREN
Anping Qianpu Wire Mesh Products Co., Ltd. |
|
Verified Suppliers
|
|
|
Introduction:
Twill Weave Wire Mesh: In the Twilled Woven Wire Mesh, the wires of the weft and the warp intercross two above and two below, inverting the intersections of the warp wire at an established distance, obtaining a rigid, stable and robust type of wire mesh fabric. The pattern is staggered on successive warp wires, giving the appearance of parallel diagonal lines.
230 mesh twill weve stainless steel wire mesh including 230 wires and openings of 1 inch. Using 0.036mm diameter wire, by twill weaving, woven 230 mesh opening for 0.074mm liquid or gas filter. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better. Material can easily bend by hand and cut with scissors and laser. Commonly used for laboratories, screen printing, and filters. This market grade mesh is woven from a standard wire diameter which is heavier than the wire used to weave bolting cloth.
| Mesh | Weave Pattern | Wire Diameter | Aperture | Open Area Rate | ||
| mm | Inch | mm | Inch | % | ||
| 230 | Twilled Weave | 0.036 | 0.0014 | 0.074 | 0.0029 | 45 |
1) Roll Size Roll Width: 36”, 48”, 1.0m Roll Length: 100ft, 30m
2) Cut in Pieces Rectangle shape, square shape, round shape and other required shapes and sizes. | ||||||
| AISI | Chemical Composition of Several Stainless Steel Wires (%) | |||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | |
| 304 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 18.00~20.00 | - |
| 304L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 18.00~20.00 | - |
| 316 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 |
| 316L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 12.00~15.00 | 16.00~18.00 | 2.00~3.00 |
304 stainless steel: Most common stainless alloy used in wire weaving. Excellent corrosion properties and can withstand temperatures of 1100 Degrees F.
304L stainless steel: Similar properties as 304ss but lower carbon content to permit better welding.
316 stainless steel: Similar properties to 304ss but is stabilized by the addition of Molybdenum for increased resistance to chemical corrosion.
316L stainless steel: Similar properties as 316ss but lower carbon content to permit better welding.
Superior corrosion and abrasion resistance;
Can resist to rust and bad weather;
High filter precision;
Durable and high strength;
Beautiful appearance.
High tension, much higher tension than common polyester mesh,and this property is very suitable.
Super precision: uniform wire diameter and aperture with extremely low difference.
Low elongation: very small elongation of wire mesh at high tension.
High flexibility: the wire mesh will not lose elasticity at extreme tension.
High corrosion resistance: the excellent corronsion resistance of stainless steel wire exceeds polyester fiber.
Non-electrostatic: to avoid affects of nonelectrostatic for printing and ensure the safety of priting.
Good heat melting resistance:special features of steel wire mesh suitable for heta-melting ink.
Good solvent resistance: to avoid the affects of any solvents to wire mesh.
Crossed twilled wire mesh are basic components in the production of filters, colanders for aliments, chemicals products, shielding, mosquito nets, etc.
This weave allows the use of proportionately heavier wires in a particular mesh count(number of openings per lineal inch) than is possible in plain weave.
This cloth has a wide application capable of supporting greater loads and finer filtrations.
Standard Specifications:
| Mesh/Inch | Wire Diameter | Aperture | Open Area | Weight(LB) /100 Square Foot | ||
| Inch | MM | Inch | MM | |||
| 90X90 | 0.005 | 0.127 | 0.0061 | 0.16 | 30.1 | 15.8 |
| 100X100 | 0.0045 | 0.114 | 0.0055 | 0.14 | 30.3 | 14.2 |
| 100X100 | 0.004 | 0.102 | 0.006 | 0.15 | 36 | 11 |
| 100X100 | 0.0035 | 0.089 | 0.0065 | 0.17 | 42.3 | 8.3 |
| 110X110 | 0.004 | 0.1016 | 0.0051 | 0.1295 | 30.7 | 12.4 |
| 120X120 | 0.0037 | 0.094 | 0.0064 | 0.1168 | 30.7 | 11.6 |
| 150X150 | 0.0026 | 0.066 | 0.0041 | 0.1041 | 37.4 | 7.1 |
| 160X160 | 0.0025 | 0.0635 | 0.0038 | 0.0965 | 36.4 | 5.94 |
| 180X180 | 0.0023 | 0.0584 | 0.0033 | 0.0838 | 34.7 | 6.7 |
| 200X200 | 0.0021 | 0.0533 | 0.0029 | 0.0737 | 33.6 | 6.2 |
| 250X250 | 0.0016 | 0.0406 | 0.0024 | 0.061 | 36 | 4.4 |
| 270X270 | 0.0016 | 0.0406 | 0.0021 | 0.0533 | 32.2 | 4.7 |
| 300X300 | 0.0051 | 0.0381 | 0.0018 | 0.0457 | 29.7 | 3.04 |
| 325X325 | 0.0014 | 0.0356 | 0.0017 | 0.0432 | 30 | 4.4 |
| 400X400 | 0.001 | 0.0254 | 0.0015 | 0.37 | 36 | 3.3 |
| 500X500 | 0.001 | 0.0254 | 0.001 | 0.0254 | 25 | 3.8 |
| 635X635 | 0.0008 | 0.0203 | 0.0008 | 0.0203 | 25 | 2.63 |
Other specifications according to your requirements.
In order to make an offer,please provide below specification of wire mesh
Material
Mesh size or aperture size
Wire diameter
Length per roll
Width per roll
About us
We are a professional wire mesh company.
We are located in Anping County, Hebei Province,China.
Our product range
We have our own woven machines,our technique is based on rich experience of woven,from production to selling we have our professional personnel to compeleted,our woven mesh now cover plain weave,twill weave,dutch weave,plain dutch weave,twill dutch weave,we keep the flat surface of woven procudure and accurate filtration technique.All mesh is manufactured from highly pick up of stainless steel wire.
We welcome your enquiry!
