Active Member
|
[China]
Address: No. 2503 Room,3B Buiding,ShiFu Road,LuCheng District,Wenzhou City,China
Contact name:Mark Fuel
HAINER STEEL INDUSTRIAL CO.,LIMITED |
|
|
Hot Rolled / Varnished Stainless Steel Heat Exchanger Tube 316 , JIS G3463 SUS317TB
Quick Detail:
Tube / Pipe Standard: JIS G3463
Material: SUS321TB,SUS321HTB,SUS347TB,SUS347HTB,SUSXM15J1TB,SUS329J1TB,SUS329J3LTB,SUS329J4LTB
,SUS405TB,SUS409TB,SUS 409LTB,SUS 410TB,SUS 410TiTB,SUS 430TB,SUS 430LXTB,SUS 430JL!LTB,SUS 436LTB,SUS 444TB,SUS XM8TB,SUS XM27TB
Outsider Diameter: 10mm-650mm
Min wall thickness: 1mm to 80 mm
Delivery Condition: Hot-Finished & Varnished
Type of Pipe/Tube: Seamless Steel Tube
Description:
Requirements that are necessary for products under this specification. Such requirements to be considered
included,but are not limited to,the following:
7.1.1 Quantity ( feet, meters, or number of lengths )
7.1.2 Name of material ( seamless tubes )
7.1.3 Grade ( Tables 2 for Low Alloy Steel )
7.1.4 Size ( outsider diameter,minimum wall thickness )
7.1.5 Length ( specific or random )
7.1.6 Hydro-static Test or Nondestructive Electric Test
7.1.7 Condition ( hot finished or cold finished )
7.1.8 Specification designation and year of issue
7.1.9 Special requirements and any supplementary requirements selected
Specification
This Japanese Industrial Standard specifies the stainless steel
tubes (hereafter referred to as "tubes") used for exchanging heat
on the inside and outside of the tube, such as
superheater tubes of boilers, and heat exchanger tubs, condenser
tube, such as superheater tube of boilers, and chemical and
petroleum industries, However, it is not applicable
to the heating furnace tube.
Composition
Grade | C | Si | Mn | P | S | Ni | Cr | Mo | etc |
SUS304 TB | 0.08 | 1.00 | 2.00 | 0.040 | 0.030 | 8.00～11.00 | 18.00～20.00 |
|
|
SUS304L TB | 0.030 | 1.00 | 2.00 | 0.040 | 0.030 | 9.00～13.00 | 18.00～20.00 |
|
|
SUS304H TB | 0.04～0.10 | 0.75 | 2.00 | 0.040 | 0.030 | 8.00～11.00 | 18.00～20.00 |
|
|
SUS309TB | 0.15 | 1.00 | 2.00 | 0.040 | 0.030 | 12.00～15.00 | 22.00～24.00 |
|
|
SUS309STB | 0.08 | 1.0 | 2.00 | 0.040 | 0.030 | 12.00～15.00 | 22.00～24.00 |
|
|
SUS310TB | 0.15 | 1.5 | 2.00 | 0.040 | 0.030 | 19.00～22.00 | 24.00～26.00 |
|
|
SUS310S TB | 0.08 | 1.50 | 2.00 | 0.040 | 0.030 | 19.00～22.00 | 24.00～26.00 |
|
|
SUS316 TB | 0.080 | 1.00 | 2.00 | 0.040 | 0.030 | 10.00～14.00 | 16.00～18.00 | 2.00～3.00 |
|
SUS316L TB | 0.030 | 1.00 | 2.00 | 0.040 | 0.030 | 12.00～16.00 | 16.00～18.00 | 2.00～3.00 |
|
SUS316H TB | 0.04～0.10 | 0.75 | 2.00 | 0.030 | 0.030 | 11.00～14.00 | 16.00～18.00 | 2.00～3.00 |
|
SUS316Ti TB | 0.080 | 1.00 | 2.00 | 0.040 | 0.030 | 10.00～14.00 | 16.00～18.00 | 2.00～3.00 | Ti≥5C |
SUS317TB | 0.08 | 1.00 | 2.00 | 0.040 | 0.030 | 11.00～15.00 | 18.00～20.00 | 3.00～4.00 |
|
SUS317LTB | 0.030 | 1.00 | 2.00 | 0.040 | 0.030 | 11.00～15.00 | 18.00～20.00 | 3.00～4.00 |
|
SUS836LTB | 0.030 | 1.00 | 2.00 | 0.040 | 0.030 | 24.00～265.0 | 19.00～24.00 | 5.00～7.00 | N≥0.25 |
SUS890LTB | 0.020 | 1.00 | 2.00 | 0.040 | 0.030 | 23.02815.00 | 19.00～23.00 | 4.00～5.00 | Cu 1.00～2.00 |
SUS321 TB | 0.080 | 1.00 | 2.00 | 0.040 | 0.030 | 9.00～13.00 | 17.00～19.00 |
| Ti≥5C |
SUS321H TB | 0.04～0.10 | 0.75 | 2.00 | 0.030 | 0.030 | 9.00～13.00 | 17.00～20.00 |
| Ti:4C～0.60 |
SUS347 TB | 0.080 | 1.00 | 2.00 | 0.040 | 0.030 | 9.00～13.00 | 17.00～19.00 |
| Nb≥10C |
SUS347H TB | 0.04～0.10 | 1.00 | 2.00 | 0.030 | 0.030 | 9.00～13.00 | 17.00～20.00 |
| Nb:8C～1.00 |
SUSXM15J1TB | 0.08 | 3.00～5.00 | 2.00 | 0.045 | 0.030 | 11.50～15.00 | 15.00～20.00 |
|
|
SUS329J1 TB | 0.08 | 1.00 | 1.50 | 0.040 | 0.030 | 3.00～6.00 | 23.00～28.00 | 1.00～3.00 |
|
SUS329J3 TB | 0.030 | 1.00 | 1.50 | 0.040 | 0.030 | 4.50～6.50 | 21.00～24.00 | 2.50～3.50 | N:0.08～0.20 |
SUS329J3 LTB | 0.030 | 1.00 | 1.50 | 0.040 | 0.030 | 4.50～7.50 | 21.00～26.00 | 2.50～4.00 | N:0.08～0.30 |
SUS329J4 LTB | 0.030 | 1.00 | 1.50 | 0.040 | 0.030 | 5.50～7.50 | 24.00～26.00 | 2.50～3.50 | N:0.08～0.30 |
SUS405TB | 0.08 | 1.00 | 1.00 | 0.040 | 0.030 | - | 11.50～14.50 |
| Al:0.10～0.30 |
SUS409TB | 0.08 | 1.00 | 1.00 | 0.040 | 0.030 | - | 10.50～11.75 |
| Ti:6C～0.75 |
SUS409LTB | 0.030 | 1.00 | 1.00 | 0.040 | 0.030 | - | 10.50～11.75 |
| Ti:6C～0.75 |
SUS410TB | 0.15 | 1.00 | 1.00 | 0.040 | 0.030 | - | 11.5～13.50 |
| Ti:6C～0.75 |
SUS410TiB | 0.08 | 1.00 | 1.00 | 0.040 | 0.030 | - | 11.5～13.50 |
| N≥0.25 |
SUSXM8TB | 0.08 | 1.00 | 1.00 | 0.040 | 0.030 | - | 17.00～19.00 | - | Ti:12C～1.10 |
SUSXM27TB | 0.010 | 0.40 | 0.40 | 0.030 | 0.020 | - | 25.00～27.50 | 0.75～1.50 | N≥0.015 |
| Note:The date in the above is maximum,except the spcified | |||||||||
Grade | Heat Treatment | Tensile Strength MPa(Min) | Yield Strength MPa(Min) | Elongation | ||
D＜10mm | 10≤D＜20 mm | D＞20 mm | ||||
SUS304 TB | ≥1010,Quick Cold | 520 | 205 | 27 | 30 | 35 |
SUS304L TB | ≥1040,Quick Cold | 480 | 175 | |||
SUS304H TB | ≥1010,Quick Cold | 520 | 205 | |||
SUS310S TB | ≥1030,Quick Cold | 520 | 205 | |||
SUS316 TB | ≥1010,Quick Cold | 520 | 205 | |||
SUS316L TB | ≥1010,Quick Cold | 480 | 175 | |||
SUS316H TB | ≥1040,Quick Cold | 520 | 205 | |||
SUS316Ti TB | ≥920,Quick Cold | 520 | 205 | |||
SUS321 TB | ≥920,Quick Cold | 520 | 205 | |||
SUS321H TB | Cold Working: ≥1095, Quick Cold Hot Working≥1095,Quick Hot | |||||
≥980,Quick Cold | 520 | 205 | ||||
SUS347H TB | Cold Working: ≥1095, Quick Cold Hot Working≥1095,Quick Cold | 520 | 205 | |||
SUS329J1 TB | 950,Quick Cold | 590 | 390 | 10 | 13 | 18 |
SUS329J3 TB | ≥950,Quick Cold | 620 | 450 | |||
Size | Tolerance | ||||
Cold Finished | Welded | ||||
Nominal Outside Diameter (D) | ＜40 | ±0.25 | ±0.25 | ||
40～＜50 | |||||
50～＜60 | |||||
60～＜80 | ±0.30 | ±0.30 | |||
80～＜100 | ±0.40 | ±0.40 | |||
100～＜120 | +0.40,-0.60 | +0.40,-0.60 | |||
120～＜160 | +0.40,-0.80 | +0.40,-0.80 | |||
160～＜200 | +0.40,-1.20 | +0.40,-1.20 | |||
≥200 | +0.40,-1.60 | +0.40,-1.60 | |||
| |||||
|
| Outside Diameter | Outside Diameter | ||
＜40 | ≥40 | ＜40 | ≥40 | ||
Nominal Wall Thickness (S) | ＜2.0 | +0.40 | +22%S0 | +0.40 S0 | +22%S0 |
2～＜2.4 | +20%S0 | +20%S0 | |||
2.4～＜3.8 | |||||
3.8～＜4.6 | |||||
≥4.6 | |||||
| Allowable Deviation of Length | |
Outside Diameter≤50mm | L≤7m | +7mm,-0mm |
L＞7m | Each Additional 3m on Length, The maximum deviation to add 3mm on the length is not more than 15 mm | |
Outside Diameter＞50mm | L≤7m | +10mm,-0mm |
L＞7m | Each Additional 3m on Length, The maximum deviation to add 3mm on the length is not more than 15 mm | |
Applications:
We,this type seamless and welded food steel tube be widely used in kinds of industries:
Our advantage
