Active Member
|
[China]
Address: No. 2503 Room,3B Buiding,ShiFu Road,LuCheng District,Wenzhou City,China
Contact name:Mark Fuel
HAINER STEEL INDUSTRIAL CO.,LIMITED |
|
|
SUS 304 316 Stainless Steel Plate / SS Sheet 0.1mm-150mm Thickness
Quick Detail:
Produce standard: AJIS,ASTM,AISI,EN,DIN,SUS,ASME etc.
Material: 310S,309S,316L,317,317L,321,347H,304 etc.
Thickness: 0.1mm-150mm
Width: 1m,1.22m,1.25m,1.5m Or As Required Length:And Length
Finish For Sheet: No.1,No.2B,BA finish,Mirror finish,Hairline finish etc.
Delivery condition:Hot-rolled,cold-rolled,annealed,heat-treated
Description:
Thickness: 0.1-150 mm
Width: 1000-3500mm
Length: 1m-12m Or According to customers request
Material: 304, 304L, 316L, 321, 310S, 410, 410S, 420, 420J1, 430,etc
Technique: Hot/Cold Rolled
Surface finish: No.1,BA,2B,No.4,No.8,8k,Mirror,etc
Quality Control: Mill Test Certificate is supplied with shipment, Third Part Inspection is acceptable
Marking: Registered logo,Heat Number,Steel Grade,Standard,Size
| Item | Material | Size |
| Heat-resistant | 310S/2B | 0.4-3.0*1219*2438/C |
| 2.0-3.0*1500*3000/C | ||
| 310S/No.1 | 3-12*1500*6000/C | |
| 4/12/14*1500*6000/C | ||
| 16-40*1500*6000 | ||
| 40*1500*6000 | ||
| 309S/2B | 0.4-3.0*1219*2438/C | |
| 1.0-3.0*1500*3000/C | ||
| 309S/NO.1 | 3*1219*2438/C | |
| 3-12/14*1500*6000/C | ||
| 16-40*1500/1800*6000 | ||
| 40*1500*6000 | ||
| 253MA/S30815 | 6-40*1500*6000 | |
| 6-20*1500*6000 | ||
| 904L | Regular sizes | |
| Duplex | S32304/1.4362 | 1.0-3.0*1219*2438/C |
| S32304/1.4362 | 6-40*1000 above | |
| S31803/2205 | 6-40*1000above | |
| 316L | 316L/2B | 0.4-3.0*1219*2438*C |
| 316L/NO.1 | 3-50*1500*6000/C | |
| 304 | 304/2B | 0.4-6.0*1000/1219/1500*2000/2438/C |
| 304/NO.1 | 3-50*1500*6000/C | |
| 304L | 304L/NO.1 | 3-12*1500*6000/C |
| 321 | 321/2B | 0.4*1000/1219/1500*2438 |
| 321/NO.1 | 3-12/14*1500*6000/C | |
| 201,202 | 201/2B | 0.4~3*1000/1219*C |
| 430 ,409(L),410,444 | 2B | 0.5-3.0*1000/1219*2438/C |
| NO.1 | 3-12/14*1500*6000/C |
Definitions:
1. Plate,sheet,strip,and cold work as used in this specification apply to the following
2. plate-material 3/16 in.[5.00mm] and over in thickness and over 10 in.[250 mm] in width. Finished for plate are
actually shown in Section 13.
3. sheet-material under 3/16 in.[5.00mm] in thickness and 24 in.[600mm] and over in width. Finishes for sheet are
actually shown in Section 11.
4. strip-cold-rolled material under 3/16 in.[5.00mm] in thickness and under
24 in.[600 mm] in width, Finishes are detailed in Section 12 for strip and strip edges in
Section 14 for Cold-Rolled Strip
5.cold work-the changing of mechanical properties by work hardening
Applications:
We,this material stainless steel plates be widely used in kinds of industries:
Finish Introduction
Surface Finish | Definition | Application |
2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
Our advantage
