|
[China]
Trade Verify
Contact name:Liu
JIANGSU TISCO STAINLESS CO., LTD |
|
Verified Suppliers
|
|
|
Grade 316L Stainless Steel Coils/Strips
200 Series Stainless Steel Strips
Chromium-nickel-manganese austenitic stainless steel
300 Series Stainless Steel Strips
Chromium-nickel austenitic stainless steel
201 Stainless Steel Strip
Grade 201 stainless steel strip is a lower-cost alternative to the
conventional Cr-Ni austenitic stainless steels, such as 304 strips.
202 Stainless Steel Strip
202 stainless steel strip is one of the 200 series stainless steel
strips, and China standard grade is 1Cr18Mn8Ni5N.
301 Stainless Steel Strip
Good extension ability, used for mould products. It can also be
hardened at machine speed. Good weldability. Abrasion resistance
and fatigue strength are better than 304 stainless steel strip.
304 Stainless Steel Strip
304 grade is a common material in stainless steel area, with a
density of 7.93 g/cm³, which is also called 18/8 stainless steel in
the industry. GB standard is 0Cr18Ni9.
304 stainless steel strip has good weldability. These strips
products can be used for vessel parts, stainless steel welding
pipes, stainless steel flexible hose and corrugated pipe, etc.
304L Stainless Steel Strip
It is a variant of 304 stainless steel with lower carbon content,
used in occasions where welding is required. The lower carbon
content minimizes the precipitation of carbides in the
heat-affected zone near the weld, and the precipitation of carbides
may cause stainless steel to produce intergranular corrosion
(welding erosion) in certain environments.
309S And 310S Stainless Steel Strips
Nickel and chromium content are relatively high, in order to
improve the oxidation resistance and creep strength of steel at
high temperatures.
309S stainless steel strip has high chromium and low nickel
content, It can be utilized in sulfur containing atmospheres up to
1000 degree.
310S stainless steel strip is austenitic chromium-nickel stainless
steel with good oxidation resistance and resistance, corrosion and
high temperature resistance.
316Ti Stainless Steel Strip
Grade 316Ti stainless steel strip contains a small amount of
titanium content. Tita
316(1.4401)/316L(1.4404)/316LN(1.4406) STAINLESS STEEL
The main difference between AISI 316 (1.4401) stainless steel and AISI 316L (1.4404) stainless steel is the carbon content. The "L" stands for "low carbon" content.
Due to the lower carbon amount, AISI 316L (1.4404) stainless steel has a reduced risk of sensitization (grain boundary carbide precipitation). Yet, at the same time, it loses some of its strength.
AISI 316LN (1.4406) stainless steel is alloyed with nitrogen to compensate for the loss of strength.
CHEMICAL COMPOSITION
| Element | C | Mn | Si | P | S | Cr | Ni | N | Fe |
| 316 | 0.07% | 2.0% | 1.00% | 0.045% | 0.03% | 16.5~18.5% | 10.0~13.0% | 0.11% | Remainder |
| 316L | 0.03% | 2.0% | 1.00% | 0.045% | 0.02% | 16.5~18.5% | 10.0~13.0% | 0.11% | Remainder |
| 316LN | 0.03% | 2.0% | 1.00% | 0.045% | 0.015% | 16.5~18.5% | 10.0~12.5% | 0.12~0.22% | Remainder |
MECHANICAL PROPERTIES
| Grade | Tensile Strength (MPa) |
Yield Strength (MPa)Min
| Density (g/cm3) | Brinell (HB)Max |
| 316 | 500~700 | 200 | 8 | 215 |
| 316L | 520~680 | 220 | 8 | 215 |
| 316LN | 580~780 | 205 | 8 | 220 |
316/316L/316LN COMMON APPLICATIONS
