Active Member
|
[China]
Address: Nongshi Road,#07,Dongbei Tang District,Xi Shan,Wuxi,Jiangsu,CN,Zip:214000
Contact name:Lily
Wuxi Sino Yuan Science And Technology Co.,Ltd. |
|
|
Cold Rolled Polish Bright Finish 316L Stainless Steel flat Rod
Stainless steel flat bar, is the width 12-300mm, thickness 4-60mm, and slightly rectangular cross-section of pure steel edges. Stainless steel flat bar can be finished steel.
Main use: stainless steel flat bar can be used as a finished product of iron, tools and mechanical parts, buildings used for housing aircraft structural parts, escalator.
adds Mo (2-3%), cold-rolled product appearance, good gloss, beautiful; the addition of Mo, corrosion resistance, especially resistance to pitting corrosion; excellent high temperature strength Excellent hardening (after processing weakly magnetic) solid solution state non-magnetic; relative to 304 stainless steel, it has higher prices.(10 Ni)
Welding:
316L stainless steel has good weldability. All standard welding
methods can be used for welding. According to the use, 316, 304 or
316L stainless steel Flate steel or electrode can be used for
welding. In order to obtain the best corrosion resistance, the
welded section of 304 stainless steel needs to be annealed after
welding. If 304 stainless steel is used, post-weld annealing is not
required.
Inspection:
Factory supply inspection before shipment,sampling test( cut one
piece for you to test in our lab or some other lab like SGS TUV
which you trust )
316L stainless steel tends to work harden if machined too quickly. For this reason low speeds and constant feed rates are recommended. 316L stainless steel is also easier to machine compared to 316 stainless steel due its lower carbon content.
316L stainless steel can be hot worked using most common hot working techniques. Optimal hot working temperatures should be in the range 1150-1260°C, and certainly should not be less than 930°C. Post work annealing should be carried out to induce maximum corrosion resistance. Most common cold working operations such as shearing, drawing and stamping can be performed on 316L stainless steel. Post work annealing should be carried out to remove internal stresses.
| C | S | Mn | P | S | Ni | Cr | Mo | |
| 201 | ≤0.15 | ≤1.00 | ≤5.5-7.0 | ≤0.060 | ≤0.030 | 3.50-5.50 | 16.00-18.00 | |
| 202 | ≤0.15 | ≤1.00 | ≤7.50-10.00 | ≤0.060 | ≤0.030 | 4.0-6.0 | 17.0-19.0 | --- |
| 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 8.00-11.00 | 17.00-19.00 | --- |
| 304L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 8.00-12.00 | 18.00-20.00 | --- |
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 10.00-14.00 | 16.00-18.50 | 2 |
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 12.00-15.00 | 16.00-18.00 | 2 |
Why us
What Is Your Export Package?
Interleave paper, Waterproof paper,metal belt pack the sheet, wooden pallet.For stainless Steel sheet/coil,if wooden box needed,that is also no problen for us,best packing is needed in SINO stainless steel.
What Is Your Delivery Time?
Normally 5-7 day after advance payment received or Orignal L/C at sight.(Just for regular size of stainless steel coil)
Where Is Your Main Market?
South America, Mid East, Eastern Asia, Central Americ outh Asia inculding You.
