|
[China]
Trade Verify
Address: Room 3025,3F,CAS Automobile Plaza, No. 488, Anchi Road, Jiading District,Shanghai 201805
Contact name:Wason
TOBO GROUP LTD |
|
Verified Suppliers
|
|
|
Din933 Din934 Factory Direct Stainless Steel Fastener Din933 Din934 Hex Stainless Steel Nut
According to the nominal thickness of the hexagon nut is divided into I, II and thin three types. Nuts above grade 8 are divided into two types: type 1 and type II. Type I hexagon nuts are the most widely used, and type 1 nuts are divided into A, B, C three levels, of which A and B level nuts are suitable for small surface roughness and high precision requirements of machines, equipment and structure, while C level nuts are used for rough surface and low precision requirements of machines, equipment or structure; Type 2 hexagon nut thickness is thicker, more often in the need to assemble and disassemble the occasion.
1. Certification: ISO, ROHS, SGS
2. Available Standard: DIN, ANSI, ASTM, JIS, BSW
3. Strength: Grade 4.8,Grade 8.8,Grade10.9,Grade12.9 A2-70, A4-70,
A4-80
4. Finishing: Yellow, blue, white zinc plated,
Galvanized,HDG,Chromate,Dacromet
5. Available material: Carbon steel, stainelss steel SS304, A2
,Stainless steel SS314,A4.
6. Size: M2-M100, Length: 5-300mm, Moq: 500pcs, Port: Shenzhen,
Shanghai
7. Available Packing: Plastic bags+Chipboard Cartons+Plywood pallet
with Belt &Film.
| Thread Specification D | M1.6 | M2 | M2.5 | M3 | (M3.5) | M4 | M5 | M6 | M8 | M10 | M12 | (M14) | M16 | (M18) | |
| P | Screw Pitch | 0.35 | 0.4 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 |
| da | Max | 1.84 | 2.3 | 2.9 | 3.45 | 4 | 4.6 | 5.75 | 6.75 | 8.75 | 10.8 | 13 | 15.1 | 17.3 | 19.5 |
| Min | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | |
| dw | Min | 2.4 | 3.1 | 4.1 | 4.6 | 5.1 | 5.9 | 6.9 | 8.9 | 11.6 | 14.6 | 16.6 | 19.6 | 22.5 | 24.9 |
| e | Min | 3.41 | 4.32 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 14.38 | 17.77 | 20.03 | 23.36 | 26.75 | 29.56 |
| m | Max | 1 | 1.2 | 1.6 | 1.8 | 2 | 2.2 | 2.7 | 3.2 | 4 | 5 | 6 | 7 | 8 | 9 |
| Min | 0.75 | 0.95 | 1.35 | 1.55 | 1.75 | 1.95 | 2.45 | 2.9 | 3.7 | 4.7 | 5.7 | 6.42 | 7.42 | 8.42 | |
| mw | Min | 0.6 | 0.8 | 1.1 | 1.2 | 1.4 | 1.6 | 2 | 2.3 | 3 | 3.8 | 4.6 | 5.1 | 5.9 | 6.7 |
| s | Max=DN | 3.2 | 4 | 5 | 5.5 | 6 | 7 | 8 | 10 | 13 | 16 | 18 | 21 | 24 | 27 |
| Min | 3.02 | 3.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 12.73 | 15.73 | 17.73 | 20.67 | 23.67 | 26.16 | |
| Thread Specification D | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | (M45) | M48 | (M52) | M56 | (M60) | M64 | |
| P | Screw Pitch | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 |
| da | Max | 23.7 | 25.9 | 29.1 | 32.4 | 35.6 | 38.9 | 42.1 | 45.4 | 48.6 | 51.8 | 56.2 | 60.5 | 64.8 | 69.1 |
| Min | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | 45 | 48 | 52 | 56 | 60 | 64 | |
| dw | Min | 31.4 | 33.2 | 38 | 42.8 | 46.6 | 51.1 | 55.9 | 60 | 64.7 | 69.5 | 74.2 | 78.7 | 83.4 | 88.2 |
| e | Min | 37.29 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | 76.95 | 82.6 | 88.25 | 93.56 | 99.21 | 104.86 |
| m | Max | 11 | 12 | 13.5 | 15 | 16.5 | 18 | 19.5 | 21 | 22.5 | 24 | 26 | 28 | 30 | 32 |
| Min | 9.9 | 10.9 | 12.4 | 13.9 | 15.4 | 16.9 | 18.2 | 19.7 | 21.2 | 22.7 | 24.7 | 26.7 | 28.7 | 30.4 | |
| mw | Min | 7.9 | 8.7 | 9.9 | 11.1 | 12.3 | 13.5 | 14.6 | 15.8 | 17 | 18.2 | 19.8 | 21.4 | 23 | 24.3 |
| s | Max=DN | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 |
| Min | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | 78.1 | 82.8 | 87.8 | 92.8 | |
