Active Member
|
[China]
Address: Building 4A, Cross-border E-commerce Industrial Park, Shiqiaopu, High-tech Zone, Mianyang City, SC, China
Contact name:Bruce Chiu
Mianyang Baoheng New Material Technology Co.,Ltd |
|
|
X22CrMoV12-1 Stainless Steel Sheets Plates W-Nr 1.4923
Description
X22CrMoV12-1 Stainless Steel Sheets Plates W-Nr 1.4923 is Heat-treatable high-temperature steel with good thermal resistance
up to 580 °C and scaling resistance up to 600 °C.
All of X22CrMoV12-1 Stainless Steel Sheets Plates W-Nr 1.4923 conform to Military standard, nuclear power. 100% Ultrasonic
test SEP 1923/SAE AMS 2154 /EN 10228-3 /GB/T 4162 /ASTM E2375 .
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
Square bar / Flat bar: 3mm to 800mm
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Products Details
X22CrMoV12-1 Stainless Steel Sheets Plates W-Nr 1.4923
| Chemical Composition (weight%): | Carbon, C (％): 0.18 ~ 0.24 Silicon, Si (％): ≤ 0.50 Manganese, Mn (％): 0.40 ~ 0.90 Phosphorus, P (％)≤: 0.025 Sulfur, S (％)≤: 0.015 Chromium, Cr (％): 11.0 ~ 12.5 Nickel, Ni (％): 0.30 ~ 0.80 Molybdenum, Mo (％): 0.80 ~ 1.20 Nitrogen, N (%): - Aluminum, Al (%): - Niobium, Nb (%): - Vanadium, V (％): 0.20 ~ 0.35 |
| Mechanical Properties Under Final Heat Treatment: | Condition: solution treatment Tensile strength, σb/MPa: 700 ~ 850 Yield strength, σs≥/MPa: 600 Elongation, δ5≥(％): 14.0 Non-scale temperature in Air: 600℃ |
Applications:
X22CrMoV12-1 Stainless Steel Sheets Plates W-Nr 1.4923 used most
often in the reactor engineering, chemical industry as well as in
turbine, steam boiler and pipeline construction and for screws and
nuts.
X22CrMoV12-1 Stainless Steel Sheets Plates W-Nr 1.4923
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of X22CrMoV12-1 Stainless Steel Sheets Plates W-Nr 1.4923 and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces, the appearance of both ends, set length,
bending, outer diameter and Wall thickness will be checked one by
one. You can rest assured that all products you receive from us are
reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1000KG.If you want to place an order as the
start of our cooperation, we can accept smaller quantities at the
first time. Of course, after the start, We will have more stable
and long-term cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
FedEx/DHL/UPS accounts can be used for sampling, and the transportation cost is borne by you.
