Active Member
|
[China]
Address: Building 4A, Cross-border E-commerce Industrial Park, Shiqiaopu, High-tech Zone, Mianyang City, SC, China
Contact name:Bruce Chiu
Mianyang Baoheng New Material Technology Co.,Ltd |
|
|
Custom 465 Stainless Steel Sheets Plates AMS 5936 UNS S46500
Description
Custom 465 Stainless Steel Sheets Plates AMS 5936 UNS
S46500 is designed for applications in the field of excellent
notch tensile strength and fracture toughness for medical
instruments.Custom 465 meets the high demands on materials, that
are required in the medical technology.
It is used for the production of endoscopic instruments for surgery
and for dental instruments, needles, needle wires and other
instruments with small diameters.
All of Custom 465 Stainless Steel Sheets Plates AMS 5936 UNS S46500 conform to Military standard, nuclear power. 100% Ultrasonic
test SEP 1923 /GB/T 4162 /ASTM E2375 /SAE AMS 2154 /EN 10228-3.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Products Details
Custom 465 Stainless Steel Sheets Plates AMS 5936 UNS S46500
Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): ≤ 0.020 Si (％): ≤ 0.25 Mn (％): ≤ 0.25 P (％)≤: 0.015 S (％)≤: 0.010 Cr (％): 11.0 ~ 12.5 Ni (％): 10.75 ~ 11.25 Mo (％): 0.75 ~ 1.25 Co (%): - W (%): - Al (%): - Cu (%): - Ti (%): 1.50 ~ 1.80 | Condition: H950 Tensile strength, σb/≥ MPa: 1765 Yield strength, σ0.2/≥ MPa: 1655 Elongation, δ ≥(％): 12.0 Reduction of area, ф ≥ (％): 55.0 Hardness | HBW: HRC 48 min. |
Applications:
Custom 465 Stainless Steel Sheets Plates AMS 5936 UNS
S46500 used most often in the Small Turbine Engine
Shafts, Firearms, Medical,
Instruments, Fasteners, Actuators, etc.
Custom 465 Stainless Steel Sheets Plates AMS 5936 UNS S46500
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of Custom 465 Stainless Steel Sheets Plates AMS 5936 UNS S46500 and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces, the appearance of both ends, set length,
bending, outer diameter and Wall thickness will be checked one by
one. You can rest assured that all products you receive from us are
reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1000KG.If you want to place an order as the
start of our cooperation, we can accept smaller quantities at the
first time. Of course, after the start, We will have more stable
and long-term cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
FedEx/DHL/UPS accounts can be used for sampling, and the transportation cost is borne by you.
