Mianyang Baoheng New Material Technology Co.,Ltd |
|
X22CrMoV12-1 Steel Forging Parts 1.4923 Round Bar X22CrNiMoV12-12 Flat Bar
Description
Our company provides X22CrMoV12-1 Steel Forging Parts 1.4923 Round Bar X22CrNiMoV12-12 Flat Bar. All of X22CrMoV12-1 Steel Forging Parts 1.4923 Round Bar X22CrNiMoV12-12 Flat Bar conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Products Details
X22CrMoV12-1 Steel Forging Parts 1.4923 is a stainless heat resisting chromium steel with molybdenum additive, which is used as a standard for steel components in steam turbines and high-temperature resistant screws.
Due to the addition of vanadium it has an increased creep rupture
strength. Scale oxide resistance up to approximately 600°C. The
corrosion resistance in natural environment is limited due to the
relatively low chromium content.
X22CrMoV12-1 Steel Forging Parts 1.4923 is steam resistant. It is
mainly used in turbine construction, aerospace and for pressure and
steam boilers.
Chemical Composition (weight%): | |
C | 0.18 ~ 0.24 |
Si | ≤ 0.50 |
Mn | 0.40 ~ 0.90 |
P | ≤ 0.025 |
S | ≤ 0.015 |
Cr | 11.0 ~ 12.5 |
Ni | 0.30 ~ 0.80 |
Mo | 0.80 ~ 1.20 |
V | 0.20 ~ 0.35 |
Mechanical Properties Under Final Heat Treatment: | |
Condition: solution treatment | |
Yield strength σ0.2≥/MPa | 600 |
Tensile strength σb/MPa | 700 ~ 850 |
Elongation δ ≥(%) | 14.0 |
Non-scale temperature in Air | 600℃ |
STANDARD: EN 10302: 2008 Creep resisting steels, nickel and cobalt alloys EN 10269: 1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties EN 10088-1: 2005 Stainless steels. List of stainless steels.
Applications:
Heat-treatable high-temperature steel with good thermal resistance up to 580 °C and scaling resistance up to 600 °C Application in reactor engineering, chemical industry as well as in turbine, steam boiler and pipeline construction and for screws and nuts.
Equivalent Grade
X22CrMoV12-1
X22CrNiMoV12-1
1.4923
X22CrMoV12-1 Steel Forging Parts 1.4923
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.