SRICO Drier in Chemical, Pharmaceutical Food
Dyestuff, Engineering, Sugar, Oil Mills, Plastic Industries etc.
Double walled construction with rigid frame work and having
insulated with Glasswool. Fresh air inlet and suitable exhaust will
be provided. The interior will be finished with heat resistant
Aluminium and outside with hammertone and Black Borders.
Heating is accomplished by totally enclosed strip Heaters made out
of imported BDH Nichrome wire provided on the sides of the inner
chamber to obtain maximum temperature.
In order to obtain temperature specially designed. Air Circulation
Fans are fitted on the side of the unit. The design of the fans are
such that the unit will such the hot air to pass over the trays
ands and throw it on the sides where they will be reheated, and
recireulated to continue the cycle. A part of the air is come out
to threw the moisture.
12 Trays 1 FanFan motor 1 x 0.25 1 Phase
24 Trays 2 FanFan motor 1 x 0.50 3 Phase
48 Trays 1 FanFan motor 1 x 1.00 3 Phase
96 Trays 2 FanFan motor 1 x 1.00 3 Phase
The fan motor is controlled by a starter and the working of the fan
indicated by pilot lamps. The temperature inside the chamber is
controlled by a thermostat and indicated by a Dial Thermo Meter. An
indicating pilot lamp is also provided to single working of the
drier. The heater circuit will be interlocked with the circulation
fan so that the heaters are not energized with out the circulation
fan being ‘ON’ which in turn will protect the heaters. Size of
Trays will be 32” x 16” x 1 Material of construction may be
aluminium or stainless steel. Wire mesh trays of size 32” x 16” can
also be supplied. Trays could be supplied at the extra cost noted
Suitable Trally can be supplied at extre cost. No tralley is
required for the tray drier of 12 & 24 test models. For 48
numbers. Model 1 Trolley is needed for 96 numbers Trolley required.
|No. of Trays||Inner Size (Inches)||Rating||Temp. Limit.|
|12 Nos.||32.5 x 32.5 x 16.5||4 KW||100’C|
|12 Nos.||32.5 x 32.5 x 16.5||6 KW||200’C|
|12 Nos.||32.5 x 32.5 x 16.5||9 KW||300’C|