SUS316 Dry Powder Granulator Machine Large Capacity HMI Controlled

HMI Control Large Capacity SUS316 Dry Powder Granulator Machine

Technical parameters:

Spray Drying And Granulating Machine Features:

1. Integrate spraying, drying/fluid granulating in a body and realize granulating in one step.

2. Using the process of spraying, it is particularly suitable for micro auxiliary raw materials and thermal sensitive raw materials. Its power is 1-2 times that FL boiling granulating machine.

3. The final moisture of products can reach 0.1%. It is equipped with powder returning device. The rate of granule forming is more than 95%. 0.2-2 mm of granule

4. The improved inner roller multi-flow atomizer in design can treat the liquid extract with 1.3g/cm3 of gravity.

5. It is very safe for operator if explosion take place ,because explosion device is adopted .

6. No dead corner . Therefore the loading and unloading are quick, light and clean,meet the requirements of the GMP.

7. The granule from the the Chemical fluidized granulating machine is very soluble, and it is better for producing the instant chemical granule.

Product details

(Granulating machine)(Granulation machine ) ( Granulating equipment, granulation equipment, Fluid bed spray granulation,Spray agglomeration )

Principle 

The powder granule in vessel (fluid bed) appears in the state of fluidization. It is preheated and mixed with clean and heated air. At the same time the solution of adhesive is sprayed into the container. It makes the particles become granulating that contains adhesive. Being of unceasing dry through hot air, the moisture in the granulating is evaporated. The process is carried out continuously. Finally it forms ideal, uniform and porous granules.

Spray agglomeration moves very small, powder particles in the fluidized bed where they are sprayed with a binder solution or suspension. Liquid bridges are created that form agglomerates from the particles. Spraying continues until the desired size of the agglomerates is reached.

After the residual moisture in the capillaries and on the surface has evaporated, hollow spaces are created in the granulate while the new structure is solidified throughout by the hardened binder. The lack of kinetic energy in the fluidized bed results in very porous structures with plenty of internal capillaries. The usual size range of the agglomerate is from 100 micrometers to 3 millimeters, while the starting material can be micro-fine.

The electronic systems and their safety should comply with the requirements set forth in 21 CFR Part 11 and GMP Annex 11;

The data should be collected at appropriate time intervals and stored in the system in a fixed format that can be printed out/read;

Applications

Pharmaceutical industry: tablet, capsule granule, granule of Chinese medicine with on or low sugar.

Foodstuff: cocoa, coffee, milk powder, juice of granule, flavoring and so on.

Other industries: pesticides, feed, chemical fertilizer, pigment, dyestuff and so on.

Schematic of installation